Tyco Electronics 15A2 manual Care and Handling of Your Touchcomputer

Page 37

Care and Handling of Your Touchcomputer

The following tips will help keep your Elo Touchcomputer functioning at the optimal level.

To avoid risk of electric shock, do not disassemble the power adapter or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from the power outlet before cleaning.

Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air.

To clean the display unit cabinet, use a cloth lightly dampened with a mild deter- gent.

Avoid getting liquids inside your touchcomputer. If liquid does get inside, have a qualified service technician check it before you power it on again.

Do not wipe the screen with a cloth or sponge that could scratch the surface.

To clean the touchscreen, use window or glass cleaner. Put the cleaner on the rag and wipe the touchscreen. Never apply the cleaner directly on the touchscreen.

Warning

This product consists of devices that may contain mercury, which must be recycled or disposed of in accordance with local, state, or federal laws. (Within this system, the backlight lamps in the monitor display contain mercury.)

Waste Electrical and Electronic Equipment (WEEE)

Directive

In the European Union, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recov- ery and recycling.

Elo TouchSystems 15A2 User Guide 37

Image 37
Contents Touchcomputer User Guide Elo TouchSystems Touchcomputer User Guide Disclaimer Copyright c 2008 Tyco Electronics. All Rights ReservedTable of Contents Regulatory Information Warranty Unpacking Your Touchcomputer SetupFront View Rear View Product OverviewSide View Base Bottom View Display Orientation Display Orientation with Peripherals Language Selection Initial Turn-OnPage Time-zone selection Test Devices Testing the TouchscreenCalibration Testing in USB MSR Keyboard KB Emulation Mode Testing the Magnetic Stripe Reader MSR optionalTesting in USB MSR Human Interface Device HID Mode Converting MSR from Keyboard Emulation to HID and vice versa Testing the Customer Display optional Testing the Finger Print Reader optional Testing the Barcode Scanner optional Page Enabling 2-D Scanning Testing the Speaker Bar optional Testing the TV tuner optional Testing the Wireless Card optionalTesting the Modem Cardoptional Testing the Cash Drawer PortElo TouchSystems 15A2 User Guide Operation OSD Menu OSD ControlShortcut keys OSD LockoutTo lock the OSD To unlock the OSDPower Button Power ControlPower Lockout To lock the PowerUsing the I/O panel TV Tuner optional PS/2 UniversalKensingtonTM Lock Mounting Option Securing the Touchcomputer BaseSnap off stand cover Mount as shownBottom View Display Angle Adding Peripherals UpgradesMaintenance Waste Electrical and Electronic Equipment Weee Directive Care and Handling of Your TouchcomputerServicing the Hard Disk Drive and Compact Flash Card To Install the Hard Disk DriveTo Install the Compact Flash Card Recovering the Operating SystemTechnical Specifications RAM Touchcomputer SpecificationsPage RS422 Mode Pin Definitionfor COM2 only COM1, COM2 ConnectorRS232 ModeRS485 Mode Pin Definitionfor COM2 only Power Input Pin Definition Control Cash Drawer Port Signal Definition and ControlESY15A2 Display SpecificationsPower Supply Specifications Touchscreen Specifications Magnetic Stripe Reader MSR Peripheral SpecificationsCustomer Display USB VersionFingerprint Reader Barcode Scanner One-Dimensional scanner specificationsSpeaker Bar TV Tuner Card Wireless CardModem Card Temperature Ranges Environmental SpecificationsUsing the Web Using the Phone Using the TouchcomputerTechnical Support Technical AssistanceRegulatory Information Electrical Safety InformationII. Emissions and Immunity Information Page III. Safety Label Warranty Page Check out Elo’s Website