Tyan Computer warranty Open Closed, Keyboard Lock Connector J13, S2877G2NR version

Page 17

2.3.9 Keyboard Lock Connector: J13

Open

Closed

Use this Jumper to enable/disable

PS/2 keyboard.

Open : Enable (Default)

Closed : Disable

2.3.10 Gigabit LAN1/LAN2 Front Panel Header: J2/ J3

PIN1

Pin #	Signal Description

1	1000Mb+/100Mb-_Link
2	1000Mb-/100Mb+_Link
3	Active-
4	Active+

Use this 4-Pin Header to connect

LAN LED on Front Panel.

Note: J3 is only available on

S2877G2NR version.

17

http://www.tyan.com

Image 17

Contents Version CopyrightTrademark Bios Table of Contents IntroductionBoard Installation Page Congratulations Hardware Specifications1394A Controller Integrated FireWire IeeeAnrf version only Expansion SlotsOS Operating System Support Software SpecificationsPage Board Installation Board Image Tiger K8WE S2877 Block Diagram Block DiagramBoard Parts, Jumpers and Connectors Jumper Legend Jumper/Connector Function SettingsClear Cmos Header J112 DefaultFront Panel Header J139 Function Chassis Intrusion Header J77 4 *FireWire IEEE1394A Enable/Disable Jumper *J147Pin-2 Pin-1Open Pin3 and Pin4 5 *FireWire IEEE1394A Pin Header *J148/*J149Buzzer/External Speaker Header J14 USB 2.0 Front Panel Headers J25/J140 7 COM2 Connector J42Open Closed Keyboard Lock Connector J13Gigabit LAN1/**LAN2 Front Panel Header J2/ **J3 S2877G2NR version11 **VGA ATI Rage XL Enable/ Disable Jumper **J85 13 *Front Panel Audio Header *P53 Chassis 3-pin FAN Connectors J36/J10 Chassis 4-pin FAN Connector J4717 3-pin or 4-pin fan support selection jumper J5 Installing the Processors Heatsink Retention Frame Installation Thermal Interface Material Type a CAM Lever Type Installation Heatsink Installation ProceduresType B Screw Retention Type Heatsink Finishing Installing the Heatsink Tips on Installing Motherboard in Chassis Installing the Memory CPU1 CPU2 DIMM-A1 DIMM-A2 DIMM-B1 DIMM-B2 Memory Installation Procedure Attaching IDE Drive Cable Attaching Drive CablesPage Installing Add-In Cards Onboard LAN LED Color Definition Connecting External DevicesTips on modifying I/O shielding for Anrf and G2NR version Installing the Power SupplyFinishing Up Applying power to the boardPage To select an item Bios Setup UtilityGetting Help Bios Menu BarBios Legend Bar Feature Option Description Bios Main MenuMenu Item Bios Advanced MenuHammer Configuration Sub-Menu Integrated Devices Sub-Menu DisabledAuto LimitNV Configuration Feature Option Description DisabledEnabled PCI Configuration Sub-Menu PCI Device, Slot # 1 ,2,3 Add On Onboard Device ControlAvailable PCI/PNP ISA UHB Region ExclusionPCI/PNP ISA IRQ Resource Exclusion Feature Option Description AvailableBoth IDE Configuration Sub-MenuOther Standard Primary Master/Slave, Secondary Master/SlaveFloppy Configuration Sub-Menu Normal 6 I/O Device Configuration Sub-Menu3F8 378 Hardware Monitor Sub-MenuOutput only Primary19200 Console Redirection Sub-Menu38400 57600 115200 VT100~255 Watchdog Timer Option Sub-MenuDirect Memory Bios Memory MenuUshc Security MenuUser Bios Boot MenuALL PCI Scsi Boot Device PriorityEnabled Power MenuStay Off Bios Exit Menu Page Memory, Video, CPU Beep CodesFlash Utility Code Beeps / Description Bios Post CodeApic Code Beeps / Description Glossary Page Page Page Page Page Technical Support Returning Merchandise for ServiceDocument # D1681-100

Related manuals

Manual 77 pages 40.96 Kb