Tyan Computer S2877 warranty Hammer Configuration Sub-Menu

Integrated Devices	Menu Item	Set integrated devices.
PCI Configuration	Menu Item	Configure PCI devices.
IDE Configuration	Menu Item	Configure IDE interface.
Floppy Configuration	Menu Item	Configure floppy interface.
I/O Device Configuration	Menu Item	Peripheral configuration
Hardware Monitor	Menu Item	Enable/disable the onboard
		Hardware monitor device
Console Redirection	Menu Item	Additional setup menus to
		configure console.
Watchdog Timer Option	Menu Item	Watchdog Timer
		configuration

3.6.1 – Hammer Configuration Sub-Menu

You can use this screen to select options for the Hammer Configuration

settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option.

PhoenixBIOS Setup Utility

Advanced

*CPU/Memory Controller WARNING*			Item Specific Help
Changing options to unsupported values
might hang the system. If this happens clear
CMOS and reboot		[Auto]
Mem Clock Mode:
Value:		[100 MHz]
Mode Memory Interleave:		[Disabled]
Dram Bank Interleave		[Disabled]
Large Memory Simulation:		[Disabled]
HT-LDT Frequency:		[200 Mhz]
MTRR Mapping		[Discrete]
		[Disabled]
ACPI SRAT Table
F1: Help	↑↓: Select Item -/+: Change Values F9: Setup Defaults
Esc: Exit	← →: Select Screen Enter: Select	Sub-Menu

F10: Previous Values

43

http://www.tyan.com