Tyan Computer Trinity 371 Motherboard manual KBC Input Clock, Onboard FDC Controller, UARTMode

Page 112

BIOS 2

Award BIOS Configuration

button, password, hotkey, or power button. Note: If you use the keyboard password option to power on your system, the power button will be disabled.

KBC Input Clock

Allows you to adjust the keyboard clock signal.

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you install an add-in FDC or the system has no floppy drive, select Disabled in this field.

Onboard Serial Port 1/ 2

Select a logical COM port address and corresponding interrupt for the first and second serial ports. The second serial port offers infrared options in the next field.

UARTMode

Select an operating mode for the second serial port:

Standard

RS-232C serial port

 

 

HPSIR

IrDA compliant serial infrared port

 

 

ASKIR

Amplitude shift keyed infrared port

 

 

Onboard Parallel Port

Select a logical LPT port address and corresponding interrupt for the physical parallel port.

Onboard Parallel Mode

Select a mode for the onboard parallel port.

PWRON After PWR Fail

This option enables the system to: (1) always power on when power is restored following a power outage; (2) always remain off when power is restored following a power outage; or (3) restore / maintain the last power status before power failure.

http://www.tyan.com

112

Image 112
Contents Tyan S1857 Motherboard User’s Manual RevisionTable of Contents 107 Overview ChapterIcons Voltage and Power Physical DimensionsProcessor Information Please refer to page 26 for current PII CPUSoftware Specifications Bios InformationDisk Drive & System I/O Creative Labs ES 1373 PCIS1857 & S1857A VIA Chipset Hardware Specifications/Features Audio S1857A only Win98 SE, Windows NT 4.0 & SPReturning Merchandise for Service Technical SupportHelp resources For Resellers OnlyThis page left blank intentionally Installation How to install our products right...the first timeUnpacking What’s the first thing I should do?Installation Steps Do Notapplypowertothe Board Ifithas Been DamagedPin jumpers Quick References for JumpersOff on Map of Motherboard Jumpers Map of S1857 Features Setting Jumpers CPU Speed Settings Jumpers JP10, JP11, JP12, JP13Panel Connector Settings Jumper J16 Power LEDFan Speed Detect Cmos RTC Mounting the Motherboard in the Chassis Installing MemoryThis Operates on 3.3 volt standby for theDIMM banks Chapter Pin Dimm Cache Memory Dimm Bank TotalInstalling the CPU and Cooling Fan Installing CPU Retention Modules Install Secure module here Connecting IDE and Floppy Drives Pin Connecting Floppy Drives Connecting the Power Supply Installing Add-on Cards Power up when the card is inserted into the slotConnecting PS/2, USB, Serial & Parallel Devices Connecting Com and Printer Ports You are done3chapter Bios Configuration Main Setup Key FunctionSystem Date/Time Floppy Drive a and BType How to Configure Entering Drive Parameters Parameter DescriptionDefault Settings Boot Sector Virus ProtectionOptimal Defaults Fail-Safe DefaultsAdvanced Cmos Setup Advanced Cmos Setup Default Settings ChartSettings Chart Advanced SetupQuick Boot 1st Boot Device 2nd Boot Device3rd Boot Device Try Other Boot DevicesBoot Up Num-Lock Password CheckBoot To OS/2 System Bios CacheableCache Bus ECC Default Primary VideoC000,16K Shadow and C400,16K Shadow Chipset Setup Advanced Chipset Setup Default Settings ChartUSB Function PIIX4 SERR#BX Master Latency Timer Clks Multi-Trans Timer ClksUSB KB/Mouse Legacy Support Port 64/60 EmulationPCI1 to PCI0 Access Sdram RAS# to CAS# DelayPower Down Sdram Method of Memory DetectionAGPMulti-Trans Timer AGP Clks AGP Low-Priority Timer ClksAGP Parity Error Response 8bit I/O Recovery TimeUSB Passive Release PIIX4 Passive ReleaseTypeF DMABuffer Control1 DMA-nTypePower Management Setup Power Management Setup Default Settings ChartPower Management/APM Power Button FunctionGreen PC Monitor Power State ACPIAware O/SVideo Power Down Mode Hard Disk Power Down ModePower Saving Type Standby/Suspend Timer UnitPC98 Power LED Slow Clock RatioDisplay Activity LAN Wake-upPlug and Play Setup RTC Wake-upPlug and Play Setup Default Settings Chart IRQ15PCI Latency Timer PCI Clocks Plug and PlayAware O/SPCI VGA Palette Snoop Allocate IRQ to PCI VGAOffBoard PCI IDE Primary IRQ Offboard PCI IDE Secondary IRQPCI Slot n IRQ Priority DMA Channel nReserved Memory Address Bios Devnode for Shadow RAMPCI Device Search Order Peripheral Setup Peripheral Setup Default Settings ChartPower Interruption Overclock Warning MessageKeyboardWake-up Function Mouse Wake-up FunctionSerial Port2 Mode IR Transmission ModeMode Description Onboard Serial Port1Parallel Port Mode EPPVersionParallel Port IRQ Parallel Port DMA ChannelSet Supervisor Password Enter Set User Password Enter Supervisor and User SecurityLanguage Utility Flash Writer Utility This page left blank intentionally System Resources Beep CodesTroubleshooting System Problems Beeps Error Message DescriptionDisplayed Error Messages Error Message Line Press F1 to continueError Message Explanation Error in the second DMA channel1Appendix Glossary AppendixGlossary Doze mode, only the CPU’s speed is slowed Glossary Appendix Glossary Appendix 2Appendix Retention Module Installation LowerTabsFigure B Figure D RemoveCPUInstalling SECC2 CPUs Option Figure H Introduction to Setup Starting SetupCase of Problems Setup KeysGetting Help Key Function Main Setup Menu Setup VariationsStandard Cmos Setup Bios Features SetupChipset Features Setup Power Management SetupStandard Cmos Setup Exit Without SavingDate TimeHard Disks Video Drive A, Drive BHalt On Bios Features Setup MemoryBios Feature Setup Default Settings Chart Se tting Option Bios De fault Se tup De faultQuick Power On Self Test Boot SequenceVirus Warning CPU Internal Cache/External CacheBoot Up Floppy Seek Boot Up NumLock StatusIDE HDD Block Mode Typematic Rate SettingTypematic Delay Msec Video Bios ShadowSecurity Option PCI/VGA Palette SnoopChipset Features Setup Advanced OptionsChipset Features Setup Default Settings Chart Bank 0/1, 2/3, 4/5 Dram TimingSdram Cycle Length Dram ClockConcurrent PCI/Host Video RAM CacheableAGP Aperture Size AGP-2xMode OnChip USBPower Management Setup Power Management Setup Default Settings ChartAcpi Function Power ManagementPM Control by APM PM Timers HDDPowerDownVideo Off Option Video Off MethodSuspend Mode RTC Alarm ResumeDozeMode PM EventsIRQ3 COM2 PnP/PCI Configuration PnP / PCI Configuration Default Settings ChartPNP OS Installed Reset Configuration DataResources Controlled By IRQ-nAssigned toPCI Delay Transaction PCI#2 Access #1 RetryPCI Dynamic Bursting PCI Master 0 WS WriteIntegrated Peripherals Default Settings Chart Integrated PeripheralsIDE Prefetch Mode Power on FunctionOn-Chip PCI IDE First/Second Channel IDE Primary/Secondary Master/Slave PIOOnboard Parallel Mode KBC Input ClockOnboard FDC Controller Onboard Serial Port 1User Password Flash Writer UtilityBios Flash Memory Writer Document # D1367-120 Jumper Settings Quick Reference See pages 15-20 for details on Jumpers

Tyan S1857, Trinity 371 Motherboard specifications

The Tyan Computer Trinity 371 motherboard, also known as the Tyan S1857, is a versatile and reliable choice for various computing needs. Designed primarily for the industrial and server markets, this motherboard is known for its robust build quality and extensive feature set that supports a wide range of applications.

One of the standout features of the Tyan S1857 is its support for AMD processors, specifically the Socket A (462) interface. This compatibility allows users to utilize a variety of AMD CPUs, including the Athlon and Duron series, ensuring that the motherboard can accommodate different performance requirements. The motherboard supports a maximum of 1.5GB of DDR SDRAM, enhancing its ability to handle memory-intensive applications and multitasking operations efficiently.

Additionally, the Tyan Trinity 371 offers integrated VIA Apollo KT133A chipsets, which provide reliable performance and optimized speed for both desktop and server environments. The motherboard supports a 100MHz Front Side Bus (FSB), ensuring high data transfer rates and improved overall system performance. The inclusion of five PCI slots permits the addition of various expansion cards, such as graphics cards, network cards, and additional storage controllers, enhancing the system’s versatility.

From a storage perspective, the Tyan S1857 features a standard IDE controller that supports up to four IDE devices. This includes the ability to connect multiple hard drives and optical drives, providing ample storage options for user needs. The motherboard also supports RAID configurations, which can enhance data redundancy and performance for server applications.

On the connectivity front, the Tyan Trinity 371 incorporates a variety of ports, including USB and serial ports, facilitating connections to peripherals and external devices. The onboard Ethernet connectivity ensures that users can easily connect to networks, making it suitable for both standalone and networked environments.

The Tyan S1857 also emphasizes stability and durability, making it a reliable choice for critical applications. Its design considers thermal management, allowing for effective heat dissipation, which is essential for maintaining optimal operating conditions, especially in industrial settings.

In summary, the Tyan Computer Trinity 371 motherboard, or Tyan S1857, stands out for its comprehensive feature set, robust support for AMD processors, and reliable performance in various applications. Its ability to support expansion through additional slots, RAID configurations, and versatile connectivity options makes it an excellent choice for both industrial and server environments.