Tyan Computer Trinity 371 Motherboard, Tyan S1857 Slow Clock Ratio, Display Activity, LAN Wake-up

Page 56

Chapter 3

BIOS Configuration

Slow Clock Ratio

This option specifies the speed at which the system clock runs in the Standby Mode power saving state. The settings are expressed as a percentage of the normal CPU clock speed. The settings are 0-12.5%, 12.5%-25%, 25%-37.5%, 37.5%-50%, 50%-62.5%, 62.5%-75%, or 75-87.5%.

Display Activity

When set to Monitor, this option enables event monitoring on the video display. If set to Monitor and the computer is in a power saving state, display activity will cause the system to enter the Full On state. AMIBIOS reloads the Standby and Suspend time-out timers if display activity occurs. The settings are Monitor or Ignore.

Device n (Device identity)

When set to Monitor, these options enable event monitoring on the specified hardware interrupt request line. If set to Monitor and the computer is in a power saving state, any activity on the IRQ line will cause the system to enter the Full On state. AMIBIOS reloads the Standby and Suspend time-out timers if activity occurs on the specified IRQ line. The settings for each of these options are Monitor or Ignore.

LAN Wake-up

When this option is Enabled, the system will wake up when a signal is received on the Wake-on LAN header. In order for this wake up function to work, the system must have been brought up at least past the POST before it was last shut down (i.e. if you turn the system off before the POST, the registry will not be set, and the system will not be able to wake up using this function). This function requires an ATX 2.01 compliant power supply with 5V standby (STB5V) current of at least 800mA. The settings are Enabled or Disabled.

PC98 Power LED

When this option is Enabled, your power LED will turn to yellow when your system is in Suspend mode. Note that if you do not have a two-color LED, your LED will turn off when the system is in Suspend mode if this option is set to Enabled. The settings are Enabled or Disabled.

FAN OFFat Suspend

If this option is Enabled, the CPU fan will turn off when the system is in Suspend mode. If Disabled, the CPU fan will remain on while the system is in Suspend mode. The settings are Enabled or Disabled.

http://www.tyan.com

56

Image 56
Contents Tyan S1857 Motherboard User’s Manual RevisionTable of Contents 107 Overview ChapterIcons Voltage and Power Physical DimensionsProcessor Information Please refer to page 26 for current PII CPUSoftware Specifications Bios InformationDisk Drive & System I/O Creative Labs ES 1373 PCIS1857 & S1857A VIA Chipset Hardware Specifications/Features Audio S1857A only Win98 SE, Windows NT 4.0 & SPReturning Merchandise for Service Technical SupportHelp resources For Resellers OnlyThis page left blank intentionally Installation How to install our products right...the first timeUnpacking What’s the first thing I should do?Installation Steps Do Notapplypowertothe Board Ifithas Been DamagedOff on Quick References for JumpersPin jumpers Map of Motherboard Jumpers Map of S1857 Features Setting Jumpers CPU Speed Settings Jumpers JP10, JP11, JP12, JP13Panel Connector Settings Jumper J16 Power LEDFan Speed Detect Cmos RTC This Operates on 3.3 volt standby for theDIMM banks Installing MemoryMounting the Motherboard in the Chassis Chapter Pin Dimm Cache Memory Dimm Bank TotalInstalling the CPU and Cooling Fan Installing CPU Retention Modules Install Secure module here Connecting IDE and Floppy Drives Pin Connecting Floppy Drives Connecting the Power Supply Installing Add-on Cards Power up when the card is inserted into the slotConnecting PS/2, USB, Serial & Parallel Devices Connecting Com and Printer Ports You are done3chapter Bios Configuration Main Setup Key FunctionSystem Date/Time Floppy Drive a and BType How to Configure Entering Drive Parameters Parameter DescriptionDefault Settings Boot Sector Virus ProtectionOptimal Defaults Fail-Safe DefaultsAdvanced Cmos Setup Advanced Cmos Setup Default Settings ChartQuick Boot Advanced SetupSettings Chart 1st Boot Device 2nd Boot Device3rd Boot Device Try Other Boot DevicesBoot Up Num-Lock Password CheckBoot To OS/2 System Bios CacheableC000,16K Shadow and C400,16K Shadow Default Primary VideoCache Bus ECC Chipset Setup Advanced Chipset Setup Default Settings ChartUSB Function PIIX4 SERR#BX Master Latency Timer Clks Multi-Trans Timer ClksUSB KB/Mouse Legacy Support Port 64/60 EmulationPCI1 to PCI0 Access Sdram RAS# to CAS# DelayPower Down Sdram Method of Memory DetectionAGPMulti-Trans Timer AGP Clks AGP Low-Priority Timer ClksAGP Parity Error Response 8bit I/O Recovery TimeUSB Passive Release PIIX4 Passive ReleaseTypeF DMABuffer Control1 DMA-nTypePower Management Setup Power Management Setup Default Settings ChartPower Management/APM Power Button FunctionGreen PC Monitor Power State ACPIAware O/SVideo Power Down Mode Hard Disk Power Down ModePower Saving Type Standby/Suspend Timer UnitPC98 Power LED Slow Clock RatioDisplay Activity LAN Wake-upPlug and Play Setup RTC Wake-upPlug and Play Setup Default Settings Chart IRQ15PCI Latency Timer PCI Clocks Plug and PlayAware O/SPCI VGA Palette Snoop Allocate IRQ to PCI VGAOffBoard PCI IDE Primary IRQ Offboard PCI IDE Secondary IRQPCI Slot n IRQ Priority DMA Channel nPCI Device Search Order Bios Devnode for Shadow RAMReserved Memory Address Peripheral Setup Peripheral Setup Default Settings ChartPower Interruption Overclock Warning MessageKeyboardWake-up Function Mouse Wake-up FunctionSerial Port2 Mode IR Transmission ModeMode Description Onboard Serial Port1Parallel Port Mode EPPVersionParallel Port IRQ Parallel Port DMA ChannelSet Supervisor Password Enter Set User Password Enter Supervisor and User SecurityLanguage Utility Flash Writer Utility This page left blank intentionally System Resources Beep CodesTroubleshooting System Problems Beeps Error Message DescriptionDisplayed Error Messages Error Message Line Press F1 to continueError Message Explanation Error in the second DMA channel1Appendix Glossary AppendixGlossary Doze mode, only the CPU’s speed is slowed Glossary Appendix Glossary Appendix 2Appendix Retention Module Installation LowerTabsFigure B Figure D RemoveCPUInstalling SECC2 CPUs Option Figure H Introduction to Setup Starting SetupGetting Help Setup KeysCase of Problems Key Function Main Setup Menu Setup VariationsStandard Cmos Setup Bios Features SetupChipset Features Setup Power Management SetupStandard Cmos Setup Exit Without SavingDate TimeHard Disks Halt On Drive A, Drive BVideo Bios Features Setup MemoryBios Feature Setup Default Settings Chart Se tting Option Bios De fault Se tup De faultQuick Power On Self Test Boot SequenceVirus Warning CPU Internal Cache/External CacheBoot Up Floppy Seek Boot Up NumLock StatusIDE HDD Block Mode Typematic Rate SettingTypematic Delay Msec Video Bios ShadowSecurity Option PCI/VGA Palette SnoopChipset Features Setup Advanced OptionsChipset Features Setup Default Settings Chart Bank 0/1, 2/3, 4/5 Dram TimingSdram Cycle Length Dram ClockConcurrent PCI/Host Video RAM CacheableAGP Aperture Size AGP-2xMode OnChip USBPower Management Setup Power Management Setup Default Settings ChartPM Control by APM Power ManagementAcpi Function PM Timers HDDPowerDownVideo Off Option Video Off MethodSuspend Mode RTC Alarm ResumeDozeMode PM EventsIRQ3 COM2 PnP/PCI Configuration PnP / PCI Configuration Default Settings ChartPNP OS Installed Reset Configuration DataResources Controlled By IRQ-nAssigned toPCI Delay Transaction PCI#2 Access #1 RetryPCI Dynamic Bursting PCI Master 0 WS WriteIntegrated Peripherals Default Settings Chart Integrated PeripheralsIDE Prefetch Mode Power on FunctionOn-Chip PCI IDE First/Second Channel IDE Primary/Secondary Master/Slave PIOOnboard Parallel Mode KBC Input ClockOnboard FDC Controller Onboard Serial Port 1User Password Flash Writer UtilityBios Flash Memory Writer Document # D1367-120 Jumper Settings Quick Reference See pages 15-20 for details on Jumpers

Tyan S1857, Trinity 371 Motherboard specifications

The Tyan Computer Trinity 371 motherboard, also known as the Tyan S1857, is a versatile and reliable choice for various computing needs. Designed primarily for the industrial and server markets, this motherboard is known for its robust build quality and extensive feature set that supports a wide range of applications.

One of the standout features of the Tyan S1857 is its support for AMD processors, specifically the Socket A (462) interface. This compatibility allows users to utilize a variety of AMD CPUs, including the Athlon and Duron series, ensuring that the motherboard can accommodate different performance requirements. The motherboard supports a maximum of 1.5GB of DDR SDRAM, enhancing its ability to handle memory-intensive applications and multitasking operations efficiently.

Additionally, the Tyan Trinity 371 offers integrated VIA Apollo KT133A chipsets, which provide reliable performance and optimized speed for both desktop and server environments. The motherboard supports a 100MHz Front Side Bus (FSB), ensuring high data transfer rates and improved overall system performance. The inclusion of five PCI slots permits the addition of various expansion cards, such as graphics cards, network cards, and additional storage controllers, enhancing the system’s versatility.

From a storage perspective, the Tyan S1857 features a standard IDE controller that supports up to four IDE devices. This includes the ability to connect multiple hard drives and optical drives, providing ample storage options for user needs. The motherboard also supports RAID configurations, which can enhance data redundancy and performance for server applications.

On the connectivity front, the Tyan Trinity 371 incorporates a variety of ports, including USB and serial ports, facilitating connections to peripherals and external devices. The onboard Ethernet connectivity ensures that users can easily connect to networks, making it suitable for both standalone and networked environments.

The Tyan S1857 also emphasizes stability and durability, making it a reliable choice for critical applications. Its design considers thermal management, allowing for effective heat dissipation, which is essential for maintaining optimal operating conditions, especially in industrial settings.

In summary, the Tyan Computer Trinity 371 motherboard, or Tyan S1857, stands out for its comprehensive feature set, robust support for AMD processors, and reliable performance in various applications. Its ability to support expansion through additional slots, RAID configurations, and versatile connectivity options makes it an excellent choice for both industrial and server environments.