Tyan Computer I7320, S5350 user manual Boot Features, Summary Screen, Quiet Boot, Quick Boot Mode

Page 35

Tiger i7320 S5350

Chapter 3: BIOS Setup

3.3.3 Boot Features

This option allows setting boot parameters. Press Enter to view the Boot Features screen.

Summary Screen

Enables or disables the display of the summary screen during boot up.

When Summary Screen is Enabled (the default), a Phoenix BIOS Setup Utility summary screen appears during system boot after the power-on self-test (POST). The summary screen lists many of the system setup settings. When this option is set to Disabled, the summary screen does not appear.

Enabled / Disabled

Quiet Boot

Enables or disables the OEM logo screen during boot up.

Enabled / Disabled

Quick Boot Mode

This BIOS feature allows you to decrease the time it takes to boot up the computer by shortening or skipping certain standard booting procedures.

If enabled, the BIOS will shorten the booting process by skipping some tests and shortening others. In addition, it will also perform the following to further speed up the booting process:

Spin up the hard disks as soon as power is supplied (or as soon as possible)

Initialize only critical parts of the chipset

Read memory size from the SPD (Serial Presence Detect) chip on the memory modules

Eliminate logo delays

If disabled, the BIOS will run the whole gamut of boot-up tests.

It is recommended that you disable this feature when you boot up a new computer for the first time or whenever you install a new piece of hardware. This allows the BIOS to run full diagnostic tests to detect any problems that may slip past Quick Boot's abbreviated testing scheme.

After a few error-free test runs, you should enable this feature for much faster booting. Enabled / Disabled

3-7

http://www.tyan.com

Image 35
Contents Tiger i7320 S5350 TigerTable of Contents Iii SATA/RAID SetupTiger i7320 S5350 Table of Contents Before you begin… Check the package contents before you proceedCongratulations Hardware SpecificationsIntegrated Serial ATA PowerMemory Integrated PCI IDEInstallation Notes Installing the MotherboardBoard Image Block Diagram S5350 Motherboard ComponentsJumpers and Connectors SO-DIMM Socket J19 Optional Smdc Connector J21 OptionalExternal speaker Header JP4 Front Panel Connector J22Front Panel USB 2.0 Connector JP13 USB2 Chassis Fan Connectors with Fan Control FAN 1/2/3/4/5Sata activity LED Header JP16 CPU FAN1/FAN2 Connectors11 COM2 connector JP18 Chassis Fan Connectors FAN6, FAN713 LAN1/LAN2 speed LED Headers JP24, JP29 12 LAN1/LAN2 activity LED Headers JP21, JP30Pin 15 3-pin Power LED Connector JP32Clear Cmos Jumper JP25 Mounting the Motherboard Registered ECC and non-ECC Memory is supported Installing MemoryAlways install memory beginning with DIMM4 Processor Installation Memory Installation ProcedureInstalling the Processor and Cooling Fan Cooling Fan Installation Installing Drive Cables Installing Expansion Cards Installing Optional SO-DIMM modules Off Connecting External DevicesPort definitions Onboard LAN LED Color DefinitionFinishing Up Installing the Power SupplyKey Function About the BiosStarting Setup Case of ProblemsAdvanced Main Bios SetupSetup Variations MainSystem Memory System Time / Date setupMain Legacy Diskette aMulti-Sector Transfers IDE Master / Slave SetupLBA Mode Control Bit I/O Transfer ModeUltra DMA Mode Null / Write Protect Cache System Bios AreaNull / Write Protect Cache Video Bios Area Memory CacheSummary Screen Boot FeaturesQuiet Boot Quick Boot ModeAdvanced Extended Memory TestingInstalled OS Reset Configuration DataParallel ATA Large Disk Access ModeNative Mode Operation Sata RAID EnableSpectrum Spread Hardware MonitorAdvanced Chipset Control Serr signal condition Force Compliance Mode EntryDram Data Integrity Mode ECC Error TypeOption ROM Scan Integrated LAN PCI-E port a DeviceThermal Management Advanced Processor OptionsHyper Threading Technology Base I/O Address 4 I/O Device ConfigurationSet Max Ext CPUID=3 Serial Port aParallel Port Serial Port B2F8 ModeFloppy Disk Controller EnabledClear all DMI event logs DMA Event LoggingECC Event Logging Flow Control Console Redirection Com Port AddressBaud Rate Console TypePower-on wait time ASF Configuration Minimum WatchDog TimeoutBios Boot Timeout OS Boot TimeoutSecurity Set Supervisor PasswordSet User Password Password on bootPower Exit BootRAID 1 mirroring What is RAID?Introduction RAID0 strippingIntel Application Accelerator RAID Edition BiosConfiguring Bios for Intel RAID for Serial ATA on board RAID migration featureDelete RAID Volume Creating, Deleting, and Resetting RAID SetsCreate RAID 0 or RAID 1 Volume Instructions on Creating F6 Floppy Diskette Reset RAID DataDescription Installation Using F6 MethodConfirming Version of Intel RAID Option ROM Installed Intel RAID Option ROMMain Menu Create Array Menu Tiger i7320 S5350 Confirm the exit by pressing Y key Delete Array Menu Will be Lost Reset Disks to Non-RAIDInstallation Steps Installing the Intel Application Accelerator RAID EditionInstallation Caution Installation Choose Destination Location Installation Welcome ScreenInstallation License Agreement Installation Setup Status Installation Select Program FolderInstallation InstallShieldR Wizard Complete Using the Intel Application Accelerator RAID Edition Utility Following instructions assume classic modeRAID Driver File Properties Issues During InstallationSymptom Incompatible Hardware RAID ReadyRAID Ready System Requirements Steps on Setting Up a RAID Ready SystemRAID Migration Instructions Creating a New Partition Using Windows* Disk ManagementCreate RAID Volume from Existing Hard Drive Strip Sizes Select the RAID Volume Name, RAID Level, and Strip SizeRAID Volume Name RAID Level4KB Migration Process May Take Considerable Time to Complete Windows* XP / Windows Uninstalling the Intel Application Accelerator RAID EditionUninstall Warning Intel Storage Utility Unattended Installation Under Windows* XP / WindowsCreate Volume Manually Strip Size Settings Descriptions Successful Creation Confirm Creation of New RAID VolumeTiger i7320 S5350 Memory, Video, CPU Beep CodesFlash Utility Appendix I Glossary Tiger i7320 S5350 Tiger i7320 S5350 Mirroring see RAID Tiger i7320 S5350 Striping see RAID Technical Support Returning Merchandise for ServiceDocument # D1605

S5350, I7320 specifications

The Tyan Computer I7320 S5350 is a high-performance server motherboard designed for enterprise-level applications. Ideal for data centers and demanding computing environments, the I7320 S5350 delivers a blend of reliability, scalability, and advanced technology that caters to intensive processing needs.

One of the standout features of the I7320 S5350 is its support for Intel's Xeon processors. The motherboard offers dual socket configurations, allowing for the installation of two Xeon processors. This capability significantly enhances computational performance, enabling organizations to handle heavy workloads, run complex simulations, and manage multiple virtual machines seamlessly.

The I7320 S5350 is built with a robust chipset that supports the latest memory technologies. It accommodates DDR4 RAM, providing increased bandwidth and improved energy efficiency compared to previous generations. The motherboard supports up to 1TB of memory across eight DIMM slots, ensuring ample capacity for high-demand applications.

Storage flexibility is another key characteristic of the I7320 S5350. The motherboard features multiple SATA interfaces for traditional hard drives and SSDs, as well as support for NVMe devices through M.2 slots. This allows for fast data access and transfer speeds, which are essential for applications requiring quick responses and reduced latency.

In terms of connectivity, the Tyan I7320 S5350 offers a range of options to meet diverse networking needs. It includes several PCIe slots for add-on cards, ensuring that users can expand their systems with additional networking, storage, or graphic capabilities. Advanced networking support is provided through integrated dual-port 10GbE LAN, allowing for high-speed network connectivity and efficient data transfers.

The motherboard also incorporates advanced management features with support for remote management technologies. This is vital for IT administrators who need to monitor and manage systems in real-time, providing a layer of accessibility that enhances operational efficiency.

In summary, the Tyan Computer I7320 S5350 stands out as a powerful and versatile motherboard designed for demanding data center applications. With its dual Xeon processor support, extensive memory capability, diverse storage options, and robust connectivity, it’s a comprehensive solution for businesses looking to enhance their computing infrastructure and meet the challenges of modern workloads. Whether for virtualization, database management, or high-performance computing, the I7320 S5350 is a reliable choice for enterprises aiming for optimal performance and scalability.