Tyan Computer S5350 Installing the Intel Application Accelerator RAID Edition, Installation Steps

Page 62

Tiger i7320 S5350

Chapter 4: SATA/RAID Setup (for SATA RAID model)

 

 

 

4.8 Installing the Intel Application Accelerator RAID Edition

4.8.1 Installation Caution

Warning

The Intel Application Accelerator RAID Edition driver may be used to operate the hard drive from which the system is booting or a hard drive that contains important data. For this reason, you cannot remove or un- install this driver from the system after installation; however, you will have the ability to un-install all other non-driver components.

The following non-driver components can be un-installed:

Intel Application Accelerator RAID Edition Utility

Help Documentation

Start Menu Shortcuts

System Tray Icon Service

RAID Monitor Service

4.8.2 Steps to Take Before Installing the Intel Application Accelerator RAID Edition

Resolve Conflicts in Device Manager

Before installing the Intel Application Accelerator RAID Edition, there should be NO conflicts (e.g. yellow exclamation points or red X’s) in Device Manager under Hard Disk Controllers. Device Manager can be accessed by going to: Start Button / Settings / Control Panel / System

/Device Manager. Often, installing the Intel® Chipset Software Installation Utility will resolve conflicts where the operating system does not properly recognize the Intel device.

Please refer to Appendix A for additional information on the Intel Chipset Software Installation Utility.

4.8.3 Obtaining and Installing the Intel Application Accelerator RAID Edition

The Intel Application Accelerator RAID Edition is most likely supplied on a CD-ROM that was included with your motherboard or system.

The installation program should launch after you double-click on the file name. Click on the “Next” button at the Welcome screen. Read the license agreement and click on the “Yes” button to accept the license terms and continue. Click on the “Next” button to install the driver in the default folder location. Click on the “Next” button to create the default Program Folder. The driver files will now be installed. When finished installing, select the “Yes” button for the reboot option and click on the “Finish" button to restart your computer. The Intel Application Accelerator RAID Edition should now be installed.

Note

The instructions above assume that the Intel RAID Option ROM and BIOS have been configured correctly and the RAID driver has been installed using the F6 installation method.

Installation Steps

After clicking on the .EXE file, installation will begin and the following screen will temporarily appear:

4-12

http://www.tyan.com

Image 62
Contents Tiger Tiger i7320 S5350Table of Contents SATA/RAID Setup IiiTiger i7320 S5350 Table of Contents Check the package contents before you proceed Before you begin…Hardware Specifications CongratulationsIntegrated PCI IDE PowerMemory Integrated Serial ATAInstalling the Motherboard Installation NotesBoard Image Block Diagram Motherboard Components S5350Jumpers and Connectors Smdc Connector J21 Optional SO-DIMM Socket J19 OptionalFront Panel Connector J22 External speaker Header JP4Chassis Fan Connectors with Fan Control FAN 1/2/3/4/5 Front Panel USB 2.0 Connector JP13 USB2CPU FAN1/FAN2 Connectors Sata activity LED Header JP16Chassis Fan Connectors FAN6, FAN7 11 COM2 connector JP1812 LAN1/LAN2 activity LED Headers JP21, JP30 13 LAN1/LAN2 speed LED Headers JP24, JP29Pin 15 3-pin Power LED Connector JP32Clear Cmos Jumper JP25 Mounting the Motherboard Registered ECC and non-ECC Memory is supported Installing MemoryAlways install memory beginning with DIMM4 Processor Installation Memory Installation ProcedureInstalling the Processor and Cooling Fan Cooling Fan Installation Installing Drive Cables Installing Expansion Cards Installing Optional SO-DIMM modules Onboard LAN LED Color Definition Connecting External DevicesPort definitions OffInstalling the Power Supply Finishing UpCase of Problems About the BiosStarting Setup Key FunctionMain Main Bios SetupSetup Variations AdvancedLegacy Diskette a System Time / Date setupMain System MemoryMulti-Sector Transfers IDE Master / Slave SetupLBA Mode Control Bit I/O Transfer ModeUltra DMA Mode Memory Cache Cache System Bios AreaNull / Write Protect Cache Video Bios Area Null / Write ProtectQuick Boot Mode Boot FeaturesQuiet Boot Summary ScreenReset Configuration Data Extended Memory TestingInstalled OS AdvancedSata RAID Enable Large Disk Access ModeNative Mode Operation Parallel ATASpectrum Spread Hardware MonitorAdvanced Chipset Control ECC Error Type Force Compliance Mode EntryDram Data Integrity Mode Serr signal conditionIntegrated LAN PCI-E port a Device Option ROM ScanThermal Management Advanced Processor OptionsHyper Threading Technology Serial Port a 4 I/O Device ConfigurationSet Max Ext CPUID=3 Base I/O AddressMode Serial Port B2F8 Parallel PortEnabled Floppy Disk ControllerClear all DMI event logs DMA Event LoggingECC Event Logging Console Type Console Redirection Com Port AddressBaud Rate Flow ControlOS Boot Timeout ASF Configuration Minimum WatchDog TimeoutBios Boot Timeout Power-on wait timePassword on boot Set Supervisor PasswordSet User Password SecurityPower Boot ExitRAID0 stripping What is RAID?Introduction RAID 1 mirroringRAID migration feature BiosConfiguring Bios for Intel RAID for Serial ATA on board Intel Application Accelerator RAID EditionDelete RAID Volume Creating, Deleting, and Resetting RAID SetsCreate RAID 0 or RAID 1 Volume Reset RAID Data Instructions on Creating F6 Floppy DisketteIntel RAID Option ROM Installation Using F6 MethodConfirming Version of Intel RAID Option ROM Installed DescriptionMain Menu Create Array Menu Tiger i7320 S5350 Confirm the exit by pressing Y key Delete Array Menu Reset Disks to Non-RAID Will be LostInstallation Steps Installing the Intel Application Accelerator RAID EditionInstallation Caution Installation Choose Destination Location Installation Welcome ScreenInstallation License Agreement Installation Select Program Folder Installation Setup StatusInstallation InstallShieldR Wizard Complete Following instructions assume classic mode Using the Intel Application Accelerator RAID Edition UtilityRAID Ready Issues During InstallationSymptom Incompatible Hardware RAID Driver File PropertiesSteps on Setting Up a RAID Ready System RAID Ready System RequirementsCreating a New Partition Using Windows* Disk Management RAID Migration InstructionsCreate RAID Volume from Existing Hard Drive RAID Level Select the RAID Volume Name, RAID Level, and Strip SizeRAID Volume Name Strip Sizes4KB Migration Process May Take Considerable Time to Complete Windows* XP / Windows Uninstalling the Intel Application Accelerator RAID EditionUninstall Warning Unattended Installation Under Windows* XP / Windows Intel Storage UtilityCreate Volume Manually Strip Size Settings Descriptions Confirm Creation of New RAID Volume Successful CreationTiger i7320 S5350 Memory, Video, CPU Beep CodesFlash Utility Appendix I Glossary Tiger i7320 S5350 Tiger i7320 S5350 Mirroring see RAID Tiger i7320 S5350 Striping see RAID Returning Merchandise for Service Technical SupportDocument # D1605

S5350, I7320 specifications

The Tyan Computer I7320 S5350 is a high-performance server motherboard designed for enterprise-level applications. Ideal for data centers and demanding computing environments, the I7320 S5350 delivers a blend of reliability, scalability, and advanced technology that caters to intensive processing needs.

One of the standout features of the I7320 S5350 is its support for Intel's Xeon processors. The motherboard offers dual socket configurations, allowing for the installation of two Xeon processors. This capability significantly enhances computational performance, enabling organizations to handle heavy workloads, run complex simulations, and manage multiple virtual machines seamlessly.

The I7320 S5350 is built with a robust chipset that supports the latest memory technologies. It accommodates DDR4 RAM, providing increased bandwidth and improved energy efficiency compared to previous generations. The motherboard supports up to 1TB of memory across eight DIMM slots, ensuring ample capacity for high-demand applications.

Storage flexibility is another key characteristic of the I7320 S5350. The motherboard features multiple SATA interfaces for traditional hard drives and SSDs, as well as support for NVMe devices through M.2 slots. This allows for fast data access and transfer speeds, which are essential for applications requiring quick responses and reduced latency.

In terms of connectivity, the Tyan I7320 S5350 offers a range of options to meet diverse networking needs. It includes several PCIe slots for add-on cards, ensuring that users can expand their systems with additional networking, storage, or graphic capabilities. Advanced networking support is provided through integrated dual-port 10GbE LAN, allowing for high-speed network connectivity and efficient data transfers.

The motherboard also incorporates advanced management features with support for remote management technologies. This is vital for IT administrators who need to monitor and manage systems in real-time, providing a layer of accessibility that enhances operational efficiency.

In summary, the Tyan Computer I7320 S5350 stands out as a powerful and versatile motherboard designed for demanding data center applications. With its dual Xeon processor support, extensive memory capability, diverse storage options, and robust connectivity, it’s a comprehensive solution for businesses looking to enhance their computing infrastructure and meet the challenges of modern workloads. Whether for virtualization, database management, or high-performance computing, the I7320 S5350 is a reliable choice for enterprises aiming for optimal performance and scalability.