Tyan Computer S5350, I7320 user manual Main Menu

Page 56

Tiger i7320 S5350

Chapter 4: SATA/RAID Setup (for SATA RAID model)

 

 

 

4.7.3 Using the Intel RAID Option ROM

Creating, Deleting, and Resetting RAID Volumes

The Serial ATA RAID volume may be configured using the RAID Configuration utility stored within the Intel RAID Option ROM.

During the Power-On Self Test (POST), the following message will appear for a few seconds:

Note

The ‘Drive Model’, ‘Serial #’, and ‘Size’ listed in your system can differ from the following example.

Intel (R) RAID for Serial ATA - RAID BIOS v3.6.0.6277

Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.

RAID Volumes:

None defined.

Non - RAID Disks:

 

Size

Status

Bootable

Port Drive Model

Serial #

0

WDC WD2500JD-00F

WD-WMAEH2201346

232.8GB

Normal

Yes

1

WDC WD2500JD-00F

WD-WMAEH2201823

232.8GB

Normal

Yes

Press <CTRL-I> to enter Configuration Utility..

After the above message appears, press the <Ctrl> and <i> keys simultaneously to enter the RAID Configuration Utility.

4.7.4 Create RAID 0 or RAID 1 Volume

Note

The following procedure should only be used with a newly-built system or if you are reinstalling your operating system. The following procedure should not be used to migrate an existing system to RAID 0.

After pressing the <Ctrl> and <i> keys simultaneously, the following window will appear:

Intel (R) RAID for Serial ATA - RAID Configuration Utility

Copyright (C) 2003-04 Intel Corporation. All Rights Reserved. v3.6.0.6277

[

MAIN

MENU

]

1.Create RAID Volume

2.Delete RAID Volume

3.Reset Disks to Non-RAID

4.Exit

RAID Volumes: None defined.

[ DISK/VOLUME

INFORMATION ]

Non-RAID Disks:

 

 

 

 

Port Drive Model

Serial #

Size

Status

Bootable

0

WDC WD2500JD-00F

WD-WMAEH2201346

232.8GB

Normal

Yes

1

WDC WD2500JD-00F

WD-WMAEH2201823

232.8GB

Normal

Yes

 

 

 

 

 

 

[

]-Select

[ESC]-Exit

[ENTER]-Select Menu

4-6

http://www.tyan.com

Image 56
Contents Tiger Tiger i7320 S5350Table of Contents SATA/RAID Setup IiiTiger i7320 S5350 Table of Contents Check the package contents before you proceed Before you begin…Hardware Specifications CongratulationsPower MemoryIntegrated PCI IDE Integrated Serial ATAInstalling the Motherboard Installation NotesBoard Image Block Diagram Motherboard Components S5350Jumpers and Connectors Smdc Connector J21 Optional SO-DIMM Socket J19 OptionalFront Panel Connector J22 External speaker Header JP4Chassis Fan Connectors with Fan Control FAN 1/2/3/4/5 Front Panel USB 2.0 Connector JP13 USB2CPU FAN1/FAN2 Connectors Sata activity LED Header JP16Chassis Fan Connectors FAN6, FAN7 11 COM2 connector JP1812 LAN1/LAN2 activity LED Headers JP21, JP30 13 LAN1/LAN2 speed LED Headers JP24, JP29Pin 15 3-pin Power LED Connector JP32Clear Cmos Jumper JP25 Mounting the Motherboard Registered ECC and non-ECC Memory is supported Installing MemoryAlways install memory beginning with DIMM4 Processor Installation Memory Installation ProcedureInstalling the Processor and Cooling Fan Cooling Fan Installation Installing Drive Cables Installing Expansion Cards Installing Optional SO-DIMM modules Connecting External Devices Port definitionsOnboard LAN LED Color Definition OffInstalling the Power Supply Finishing UpAbout the Bios Starting SetupCase of Problems Key FunctionMain Bios Setup Setup VariationsMain AdvancedSystem Time / Date setup MainLegacy Diskette a System MemoryMulti-Sector Transfers IDE Master / Slave SetupLBA Mode Control Bit I/O Transfer ModeUltra DMA Mode Cache System Bios Area Null / Write Protect Cache Video Bios AreaMemory Cache Null / Write ProtectBoot Features Quiet BootQuick Boot Mode Summary ScreenExtended Memory Testing Installed OSReset Configuration Data AdvancedLarge Disk Access Mode Native Mode OperationSata RAID Enable Parallel ATASpectrum Spread Hardware MonitorAdvanced Chipset Control Force Compliance Mode Entry Dram Data Integrity ModeECC Error Type Serr signal conditionIntegrated LAN PCI-E port a Device Option ROM ScanThermal Management Advanced Processor OptionsHyper Threading Technology 4 I/O Device Configuration Set Max Ext CPUID=3Serial Port a Base I/O AddressSerial Port B 2F8Mode Parallel PortEnabled Floppy Disk ControllerClear all DMI event logs DMA Event LoggingECC Event Logging Console Redirection Com Port Address Baud RateConsole Type Flow ControlASF Configuration Minimum WatchDog Timeout Bios Boot TimeoutOS Boot Timeout Power-on wait timeSet Supervisor Password Set User PasswordPassword on boot SecurityPower Boot ExitWhat is RAID? IntroductionRAID0 stripping RAID 1 mirroringBios Configuring Bios for Intel RAID for Serial ATA on boardRAID migration feature Intel Application Accelerator RAID EditionDelete RAID Volume Creating, Deleting, and Resetting RAID SetsCreate RAID 0 or RAID 1 Volume Reset RAID Data Instructions on Creating F6 Floppy DisketteInstallation Using F6 Method Confirming Version of Intel RAID Option ROM InstalledIntel RAID Option ROM DescriptionMain Menu Create Array Menu Tiger i7320 S5350 Confirm the exit by pressing Y key Delete Array Menu Reset Disks to Non-RAID Will be LostInstallation Steps Installing the Intel Application Accelerator RAID EditionInstallation Caution Installation Choose Destination Location Installation Welcome ScreenInstallation License Agreement Installation Select Program Folder Installation Setup StatusInstallation InstallShieldR Wizard Complete Following instructions assume classic mode Using the Intel Application Accelerator RAID Edition UtilityIssues During Installation Symptom Incompatible HardwareRAID Ready RAID Driver File PropertiesSteps on Setting Up a RAID Ready System RAID Ready System RequirementsCreating a New Partition Using Windows* Disk Management RAID Migration InstructionsCreate RAID Volume from Existing Hard Drive Select the RAID Volume Name, RAID Level, and Strip Size RAID Volume NameRAID Level Strip Sizes4KB Migration Process May Take Considerable Time to Complete Windows* XP / Windows Uninstalling the Intel Application Accelerator RAID EditionUninstall Warning Unattended Installation Under Windows* XP / Windows Intel Storage UtilityCreate Volume Manually Strip Size Settings Descriptions Confirm Creation of New RAID Volume Successful CreationTiger i7320 S5350 Memory, Video, CPU Beep CodesFlash Utility Appendix I Glossary Tiger i7320 S5350 Tiger i7320 S5350 Mirroring see RAID Tiger i7320 S5350 Striping see RAID Returning Merchandise for Service Technical SupportDocument # D1605

S5350, I7320 specifications

The Tyan Computer I7320 S5350 is a high-performance server motherboard designed for enterprise-level applications. Ideal for data centers and demanding computing environments, the I7320 S5350 delivers a blend of reliability, scalability, and advanced technology that caters to intensive processing needs.

One of the standout features of the I7320 S5350 is its support for Intel's Xeon processors. The motherboard offers dual socket configurations, allowing for the installation of two Xeon processors. This capability significantly enhances computational performance, enabling organizations to handle heavy workloads, run complex simulations, and manage multiple virtual machines seamlessly.

The I7320 S5350 is built with a robust chipset that supports the latest memory technologies. It accommodates DDR4 RAM, providing increased bandwidth and improved energy efficiency compared to previous generations. The motherboard supports up to 1TB of memory across eight DIMM slots, ensuring ample capacity for high-demand applications.

Storage flexibility is another key characteristic of the I7320 S5350. The motherboard features multiple SATA interfaces for traditional hard drives and SSDs, as well as support for NVMe devices through M.2 slots. This allows for fast data access and transfer speeds, which are essential for applications requiring quick responses and reduced latency.

In terms of connectivity, the Tyan I7320 S5350 offers a range of options to meet diverse networking needs. It includes several PCIe slots for add-on cards, ensuring that users can expand their systems with additional networking, storage, or graphic capabilities. Advanced networking support is provided through integrated dual-port 10GbE LAN, allowing for high-speed network connectivity and efficient data transfers.

The motherboard also incorporates advanced management features with support for remote management technologies. This is vital for IT administrators who need to monitor and manage systems in real-time, providing a layer of accessibility that enhances operational efficiency.

In summary, the Tyan Computer I7320 S5350 stands out as a powerful and versatile motherboard designed for demanding data center applications. With its dual Xeon processor support, extensive memory capability, diverse storage options, and robust connectivity, it’s a comprehensive solution for businesses looking to enhance their computing infrastructure and meet the challenges of modern workloads. Whether for virtualization, database management, or high-performance computing, the I7320 S5350 is a reliable choice for enterprises aiming for optimal performance and scalability.