Vantec NST-360FBSU-BK user manual ESATA Mode

Page 12

5.4 eSATA Mode

Use in Vista X86、Vista 64 bit、Windows XP、

Windows 2000 and MAC OS

No driver is required for Vista X86, Vista 64-bit, Windows XP, Windows 2000 and Mac OS 10.2 or higher. NexStar 3 does not support Windows 98, Windows ME and Mac OS 10.1 or older in eSATA mode.

5.5 FireWire 800/400(1394b/1394a) Mode

Use in Vista X86、Vista 64 bit、Windows XP、

Windows 2000 and MAC OS

No driver is required for Vista X86, Vista 64-bit, Windows XP, Windows 2000 and Mac OS 10.2 or higher. NexStar 3 does not support Windows 98, Windows ME and Mac OS 10.1 or older in FireWire 800/400 mode.

NOTE :

Because some motherboard does not support eSATA hot-plug and play function, if you meet this situation, please follow below steps to setup NexStar3.

1.Shut down your computer.

2.Turn on NextStar 3 then connect it to your computer.

3.Power on your computer.

Installation

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Quad Interface Package Contents Table of Contents Introduction Specifications/Features NexStar 3 External 3.5 HDD EnclosureSystem Requirements Parts Layout Installation Preparing the hard drivePreparing the NexStar Installing the hard drive in the NexStar Connecting the NexStar 3 to your computer Your NexStar 3 External Hard Drive is now ready for useSystem Set Up Using the supplied cables Adapter is always recommendedESATA Mode Disconnecting the NexStar Windows 2000/XP/VistaMacOS Turn off the NexStarCreating a New Partition Go through the wizardSee the drive in Windows Explorer Formatting for Mac Users Select the Partition tabTroubleshooting /FAQ What is the max. capacity that NexStar 3 can support ?What is Daisy Chain function ? How to use it ? Please make sure that the firmware is Latest versionNo, NexStar3 doesn’t support Windows 98 system Replacement Boscell Rd
Top Page Image Contents