Nikon SB-28 TTL Auto Flash t Mode, Camera settings, Set the aperture, Set the flash sync mode

TTL Auto Flash t Mode

For cameras in Group II: F4-Series, F65-Series/N65-Series, F-801s/N8008s, F-801/N8008, Pronea 600i/6i

Available flash operation in TTL Auto Flash t Mode

Lens in use*	1	Available flash		Camera’s	Camera’s
				exposure	metering
		operation*	2
				mode	system*3
Nikkor lenses with a		Matrix Balanced		Desired	Matrix
built-in CPU*4		Fill-Flash		mode*5	Metering
		t ø
		Center-Weighted		Desired	Center-
		Fill-Flash/		mode	Weighted
		Spot Fill-Flash*6			Metering
		t ø			Spot Metering*3
Nikkor lenses		Center-Weighted Fill-		Aperture-priority	Center-Weighted
without a built-in		Flash/Spot Fill-Flash*6		auto (A)	Metering
CPU*7		t ø		Manual (M)
					Spot Metering*3

*1 Matrix Balanced Fill-Flash operation is possible with F4-Series camera when AI-S or AI-type Nikkor lenses, Nikon Series E lenses, and lenses for the F3AF are used.

*2 The above flash modes can be changed to Standard TTL Flash t .

*3 Only Standard TTL Flash can be performed when the F4’s Metering System is set to Spot Metering.

*4 With a G-type Nikkor lens attached to F4-Series, F-801s/N8008s, F-801/N8008 cameras, the A and M exposure modes cannot be used.

*5 With F65-Series/N65-Series and Pronea 600i/6i cameras, only Standard TTL Flash can be performed when the camera’s exposure mode is set to Manual (M).

*6 Center-Weighted Fill-Flash/Spot Fill-Flash is not possible with the F65-Series/N65-Series, Pronea 600i/6i cameras.

*7 With a non-CPU Nikkor lens attached to F65-Series/N65-Series or Pronea 600i/6i cameras, Standard TTL Flash can be performed. (Can only be used with exposure mode set to Manual) The camera’s exposure meter cannot be used. Set and confirm the aperture using the lens aperture ring.

Camera settings

1 Set the aperture.

—The method for setting the aperture differs, depending on the lens in use and the selected exposure mode. (See page 29 on Confirming flash shooting distance range in TTL Auto Flash t Mode.)

2 Set the flash sync mode.

—Set the camera’s flash sync mode (if available) to front-curtain sync (Normal).

31