Nikon SB-28 instruction manual Camera settings, Select the exposure mode, Set the aperture

•To extend the flash shooting distance range, choose a flash output level close to 1/1 or set the lens to a larger aperture (smaller f-number).

•% indicator appears only when used in combination with the SB-28 and

cameras in Group I (except F80-Series/N80-Series, F70-Series/N70). (See page 49 on FP High-Speed Flash sync. % in Manual Flash ƒ mode.)

Camera settings

3

4

Select the exposure mode.

—Set the camera’s exposure mode to Aperture-priority auto (A) or Manual (M).

Set the aperture.

—For cameras in Groups I and II with Nikkor lenses with a built-in CPU: Set the aperture on the camera as you watch the indicator bar ¡ on the LCD panel as it changes to match the shooting distance.

—For other camera/lens combinations: Press the { or } button to change the aperture on the LCD panel. Then set the same aperture on the lens aperture ring.

•You can calculate the correct shooting distance by using the guide

number equation. (See pages 56-57 on Guide Numbers for determining correct aperture in Manual ƒ and Repeating " Flash mode.)

5Wait for the ready-light to come on and make sure the subject is in focus before taking the picture.

47