Nikon SB-28 instruction manual Non-TTLAuto Flash ˙ Mode, For cameras in all groups, Flash settings

Non-TTL Auto Flash ˙ Mode

For cameras in all groups

In Non-TTL Auto Flash shooting, the SB-28’s light output automatically changes to match the flash-to-subject distance. The light, however, is not measured through the lens, but is measured by the light sensor on the front of the SB-28.

—The SB-28 can be used in Non-TTL Auto Flash mode with any Nikon camera/lens combination at any ISO film speed.

—You can choose apertures from f/2 to f/16 at ISO 100.

Flash settings

1

2

Select the flash mode.

—Press the µ button until ˙ appears on the LCD panel.

Select the aperture.

—Press the [ button, then press the { or } button to change the aperture, bringing the subject within the flash shooting distance range.

Flash shooting distance

Aperture value

42