Nikon SB-28 instruction manual With Nikkor lenses without a built-inCPU

For F60-Series/N60, F50-Series/N50 and F-401x/N5005 (in Aperture- Priority Auto (A) or Manual (M) mode)

Note the aperture set on the lens and set the same aperture on the SB-28’s LCD panel by pressing the { or } button. Then confirm the flash shooting distance range.

With Nikkor lenses without a built-in CPU

(for F60-Series/N60, F50-Series/N50 and F-401x/N5005)

Select the aperture on the lens and set the same aperture on the SB-28’s LCD panel by pressing the SB-28's { or } button, then confirm the flash shooting distance range.

3Wait for the ready-light to come on and make sure the subject is in focus before taking the picture.

•If the ready-light blinks for approx. 3 seconds after shooting, this indicates the light may have been insufficient for correct exposure. In this case, use a wider aperture or move closer to the subject.

37