Nikon SB-28 Setting the ISO film speed, Cameras in Groups I and, Cameras in Groups III through

Setting the ISO film speed

Cameras in Groups I and II

The ISO film speed is automatically set and indicated on the SB-28’s LCD panel.

• The usable film speed in TTL Auto Flash t mode is ISO 25 to 1000.

Cameras in Groups III through VII

Set the ISO film speed manually in this manner:

1Turn the SB-28 off.

2Turn it on again. The film speed starts blinking.

3Press the { or } button to increase or decrease the film speed.

—Press the [ button to stop the film speed from blinking.

•The film speed indicator blinks during adjustment and stops after 8 seconds unless the [ button is pressed. The last blinking number is the one automatically set.

•The following ISO film speeds can be used in TTL Auto Flash t mode : ISO 25 to 1000 for cameras in Groups III and IV, plus F-501/N2020 and F-301/N2000 cameras.

ISO 25 to ISO 400 for cameras in Group VI, plus F-401s/N4004s and F-401/N4004 cameras.

18