Nikon SB-28 instruction manual TTL Auto Flash t Mode, Flash settings, Select the flash mode

TTL Auto Flash t Mode

For cameras in Group II: F4-Series, F-801s/N8008s, F-801/ N8008, Pronea 600i/6i

Flash settings

3 Select the flash mode.

—Press the µ button until the desired auto flash mode indicator appears on the LCD panel:

tø Matrix Balanced Fill Flash and Center-Weighted Fill Flash/Spot Fill-Flash

t Standard TTL Flash

4Check the shooting distance.

A flash shooting distance range of 0.8 to 6m (2.6 to 20 ft) is shown.

5Wait for the ready-light to come on and make sure the subject is in focus before taking the picture.

•If the ready-light blinks for approx. 3 seconds after shooting, this indicates the light may have been insufficient for correct exposure. In this case, use a wider aperture or move closer to the subject.

32