Nikon SB-28 TTL Auto Flash t Mode, Camera settings, Set the aperture, Set the flash sync mode

TTL Auto Flash t Mode

For cameras in Group III: F-601/N6006, F-601M/N6000

Available flash operation in TTL Auto Flash t Mode

Use the camera’s MODE button to select the flash mode.

Lens in use	Available flash	Camera’s	Camera’s
		exposure	metering
	operation
		mode	system
Nikkor lenses with a	Matrix Balanced	Desired	Matrix
built-in CPU*1	Fill-Flash t	mode	Metering
	Center-Weighted	Desired	Center-
	Fill-Flash/Spot Fill-	mode	Weighted
	Flash t		Metering,
			Spot Metering*2
Nikkor lenses	Center-Weighted	Aperture-	Center-
without a built-in	Fill-Flash/Spot Fill-	priority	Weighted
CPU	Flash t	auto (A),	Metering,
		Manual (M)	Spot Metering*2

*1 G-type Nikkor lenses cannot be used with an F-601/N6006 camera. With a G-type Nikkor lens attached to an F-601M/N6000 camera, the A and M exposure modes cannot be used.

*2 Spot Metering is not possible with the F-601M/N6000.

Camera settings

1 Set the aperture.

Nikkor lenses with a built-in CPU

• In Programmed auto (P, PM) or Shutter-priority auto (S) mode:

—Set the lens to its minimum aperture (highest f-number) (except G-type Nikkor lenses).

• In Aperture-priority auto (A) or Manual (M) mode:

—While looking at the indicator bars _, press the { or } button to change the aperture and bring the subject within the flash shooting distance range. Then set the same aperture on the lens aperture ring.

Nikkor lenses without a built-in CPU

• In Aperture-priority auto (A) or Manual (M) mode only:

—While looking at the indicator bars _, press the { or } button to change the aperture and bring the subject within the flash shooting distance range. Then set the same aperture on the lens aperture ring.

2

3

Set the flash sync mode.

—Set camera’s flash sync mode (if available) to front-curtain sync (Normal).

Select the flash mode on the camera.

33