Nikon SB-28 instruction manual Selecting a flash mode

Selecting a flash mode

When the µ button on the back of the SB-28 is pressed, the flash mode indicator sequences through these modes:

tØ

t ˙ Q " tø

Note that the LCD indications and available flash modes differ depending on which Nikon camera and lens you are using.

The table below shows the auto flash mode recommended for use with each camera group.

—Refer to the reference pages corresponding to your camera.

Camera group	Recommended auto flash mode	Reference
		page
I	Automatic Balanced Fill-Flash with TTL Multi Sensor tØ	26–30
II	Matrix Balanced Fill-Flash tø	31–32
III	Matrix Balanced Fill-Flash t	33–34
IV	Matrix Balanced Fill-Flash t	35–37
V	Programmed TTL Auto Flash t	38–39
VI	Standard TTL Flash t	40–41
VII	Non-TTL Auto Flash ˙	42–43

•For available flash operations with the SB-28 and each camera group, refer to the table on the fold-out page at the front of this manual.

22