Vantec NST-360FBSU-BK user manual Installation, Preparing the hard drive, Preparing the NexStar

Page 8

5. Installation:

NexStar 3 External 3.5” HDD Enclosure:

5.1. Hardware Installation:

Preparing the hard drive:

(1)Set the hard drive jumpers to MASTER or SINGLE DRIVE ONLY. Please refer to the documentation included with your hard drive for information on how to accomplish this.

Preparing the NexStar 3:

(1)Remove the side of the NexStar 3 with the power and USB connection ports. If it has previously been screwed in place, remove the screws first.

(2)Carefully slide out the side approximately 3 inches. ( pic 5.1-A )

(3)Unplug the red and white cable for the LED.

(4)Slide out the rest of the side.

( pic 5.1-A )

Installation

6

Image 8

Contents Quad Interface Package Contents Table of Contents Introduction Specifications/Features NexStar 3 External 3.5 HDD EnclosureSystem Requirements Parts Layout Preparing the NexStar InstallationPreparing the hard drive Installing the hard drive in the NexStar Connecting the NexStar 3 to your computer Your NexStar 3 External Hard Drive is now ready for useSystem Set Up Using the supplied cables Adapter is always recommendedESATA Mode Disconnecting the NexStar Windows 2000/XP/VistaMacOS Turn off the NexStarCreating a New Partition Go through the wizardSee the drive in Windows Explorer Formatting for Mac Users Select the Partition tabTroubleshooting /FAQ What is the max. capacity that NexStar 3 can support ?No, NexStar3 doesn’t support Windows 98 system What is Daisy Chain function ? How to use it ?Please make sure that the firmware is Latest version Replacement Boscell Rd