Vantec LX ULTRA manual Status, Changing the host name and group name

(4)By clicking "Status", you will see information pertaining to your NAS and Hard Drive.

( Figure 5.3-C )

( Figure 5.3-C )

6. Status Page

The Status Tab is where you can change the host name, group name and administrator's password. You may also disable or enable features on the NAS such as DHCP server, SMB server and FTP server. Information about the NAS are also displayed in the “Status” tab also such as the information of Hard disk, IP address, MAC address and current installed firmware version.

6.1Changing the host name and group name.

(1)Click on "Change" ( Figure 6.1-A )

(2)Enter desired Host and Group name. When finished, press "OK". (Figure 6.1-B)

( Figure 6.1-A )

( Figure 6.1 A )

( Figure 6.1-B )

Status Page

10