Vantec LX ULTRA manual Maintenance, Upgrading firmware

13. Maintenance Page

On the maintenance page, you are able to do Firmware Upgrades, preform a System Reboot and restore Factory Defaults.

( Figure 13.1-A )

( Figure 13.1-A )

13.1Upgrading firmware

(1)Click "Browse" and locate the firmware file. When the firmware file is selected click "Open". (Figure 13.1-B)

( Figure 13.1-B )

(2)Check to make sure the file and pathway of the firmware file is correct. If everything is correct, click "Upload". ( Figure 13.1-C )

( Figure 13.1-C )

(3)When the upgrade of the firmware is complete, click on "OK". Preform a power cycle of the NAS by powering off and on the NAS. ( Figure 13.1-D )

( Figure 13.1-D )

Maintenance Page

27