Vantec LX ULTRA manual SMB Server, Creating a user account, Modifying a users account

8. SMB Server

If someone wants to share the NAS disk from the network, they must apply for a user account first. Creating, deleting, modifying and enabling/ disabling accounts can all be done on SMB Server page. Once the user account has been setup, they may access the NAS disk by using their set user name and password.

8.1 Creating a user account ( Figure 8.1-A )

(1)Click on "New" to setup a new account. ( Figure 8.1-A )

(2)Enter the desired "Name" and "Password" for the account and click "Add".

( Figure 8.1-B )

NOTE :

1.The Access authority of "Read Only" means that the user can only read files from the NAS only. "Read/Write" means that the user is able to read and write to the NAS freely.

2.Spaces is not an acceptable character.

8.2Modifying a user's account

(1)Select the user account you wish to modify. Once selected, click "Modify". ( Figure 8.2-A )

(2)You may change the user's password and access authority. When finished, click "Modify". ( Figure 8.2-B )

( Figure 8.1-B )

( Figure 8.2-A )

( Figure 8.2-B )

SMB Server

15