Remote Control, Basic Functions | Classe Audio CDP-100 specification

STANDBY

LIGHT INFO DISP

TIME PROG 1 2

3 4 5 6

7 8 9 0

HOME

ENTER

REPEAT	A–B		STOP
	PAUSE		PLAY
F1		F2
F3		F4	MUTE

The Remote Control

Your new CD player comes with a versatile remote control which can control both the CDP-100 itself and several aspects of the rest of a Classé-based system. The keys are arranged in logical groups according to their functions.

1Basic Functions

This section along the top of the remote control groups four functions that control your basic interactions with the CDP-100.

•Light switches the backlighting of the remote control on, for better visibility under low-light conditions. After a few moments of inactivity, the backlight switches off automatically.

•Info takes you directly to the status screen in the LCD menu system, displaying several items of information about the CDP-100 and its current operational status.

•Disp (for Display) cycles through the three brightness settings of the screen display.

•Standby toggles the CDP-100 between standby and operate.

2Numeric Keypad and Programming

The next section down on the remote control provides the numeric keypad for use in directly accessing particular tracks on the CD you are playing, as well as two keys that are frequently used in conjunction with the numeric keys.

•The Numeric Keypad can be used to access speciﬁc tracks directly from your remote control. Simply press the appropriate number key (or keys) followed by the Play key. The CDP-100 will go directly to the track you keyed in and begin to play. For example, to play track 12, press the 1, 2, and Play keys in sequence.

•Time cycles through the four time display modes:

time elapsed on track time elapsed on disc time remaining on track time remaining on disc

•Prog (for Program) allows you to quickly and easily create a programmed sequence of tracks to be played on the current disc. Pressing Prog will take you directly to the program page of the menu system, regardless of where you might be.

Once on the program page, you can change the highlighted track using the Up and Down buttons, and can use the Enter button to toggle whether it is included in the current program. Pressing Prog a second time returns you to wherever you had been. (Note that the program function is not available during play or pause, only when the CDP-100 is in stop.)