Classe Audio CDP-100 owner manual System Controls

Note:

•(previous) will move backward through the tracks (or the playlist, if you have created one), one track at a time. As with most CD players, the single exception to this is the first time you

press thekey, which will take to the beginning of the track currently playing. Pressing thekey again within approximately one second will then take you to the previous track.

•(next) will move forward through the tracks (or the playlist, if you have created one), one track at a time.

5System Controls

The CDP-100 remote control also can control user-defined functions as well as the volume and mute functions on a Classé system.

•F1/F2/F3/F4 keys are available for controlling aspects of the CDP-100 not covered by the other buttons on the remote control. You are able to choose what the CDP-100 should do in response to receiving the infrared signal that a particular “Fkey” has been pressed. The list of possible functions is quite extensive, and is found in the menu system (see the section The Menu System, the next section in this manual). For example, if you are using one of the DC triggers on your CDP-100, you can toggle its state manually using one of the Fkeys.

The Fkeys on all Classé remote controls issue the same infrared commands. This saves you from having to be sure you have grabbed the proper remote, since all your Classé remotes will perform the same function for each Fkey.

•Volume Up, Volume Down, Mute are designed to send commands to a Classé preamplifier or integrated amplifier you may also have in the system.

19