Classe Audio CDP-100 owner manual Specifications, Classé Audio

Page 29

Specifications

Classé Audio reserves the right to make improvements without notice.

Frequency response

 

20Hz – 20kHz ± 0.1dB

Signal-to-noise ratio

 

110dB typical

Channel separation

 

better than 110dB

Distortion (THD + noise)

 

less than 0.002%

 

(unweighted, 0dBFS signal, 10Hz – 20kHz)

Maximum output voltage (0dBFS signal)

 

2Vrms (single-ended)

 

 

 

4Vrms (balanced)

Analog output

 

1 balanced (XLR)

 

 

 

1 single-ended (RCA)

Digital output (S/PDIF)

 

0.5V, 75Ω (RCA)

Digital-to-analog conversion

 

dual differential 24-bit DACs

Analog filter

2 cascaded 1st order Bessel filters

Clock jitter

 

less than 2 picoseconds

Sample rate

 

352.8kHz

Formats supported

 

CD, CD-R, CD-RW, HDCD®

Rated power consumption

 

30W

Idle power consumption

 

29W

Mains voltage

 

specified on rear panel decal

 

(cannot be changed by user or dealer).

 

 

Dimensions (not incl. controls or connectors)

Width: 17.5" (445mm)

 

 

 

Height: 4.75" (121mm)

 

 

 

Depth: 16.5" (419mm)

Net weight

 

26lbs (12kg)

Shipping weight

 

33lbs (15kg)

For more information, see your Classé dealer or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

http://www.classeaudio.com email: cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

HDCD®, the HDCD logo and High Definition Compatible Digital are registered trademarks. Microsoft and HDCD are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. HDCD system manufactured under license from Microsoft Corporation.

29

Image 29
Contents CDP-100 CD Player Page Important Safety Instructions Contents Welcome to the Classé family Word about installationUnpacking and Placement Operating voltage Warm up/break-in period Please read this manual… Special Design Features Extraordinary longevity Front Panel Standby button & LED indicatorLCD touchscreen Menu buttonLoad button IR windowRear Panel Single-ended RCA analog outputs DC Trigger Input and Output IR Input and OutputClassé can Bus Control Ports AC Mains Power switchRS-232 Control Port AC Mains InputNumeric Keypad and Programming Remote ControlBasic Functions Transport Controls Navigation KeysSystem Controls Playlist Menu SystemOperational menu Controls menu Repeat mode Shuffle Time display ProgramTeach IR Main menu systemTriggers Display setup Remote Fkeys Status Version info Sensors Brightness Timeout Display setup menuRemote Fkeys LanguageThere is no sound and the Standby LED is not lit TroubleshootingMy CD is skipping IR remote control seems not to function Cleaning the cabinet Care and MaintenanceClassé Audio SpecificationsDimensions Page V1.7 020305