UNICOM Electric FEP-31024T-1, FEP-31016T-1 Network Application, Status LEDs, Small Workgroup

	LK/ACT
Dyna-Switch/16	FD/COL
16 Port 10/100Base-TX Switch	LK/ACT
	FD/COL

POWER

Power Indicator

LINK/ACT and FDX/COL Indicators

Network Application

This section provides a few samples of network topology in which the Switches are used. The Dyna-Switch/16 and 24 are designed to be used as segment switches. With their large address tables (8K MAC address) and high performance, they are ideal for interconnecting networking segments.

You can use the Dyna-Switch/16 and 24 to connect PCs, workstations, and servers to each other by connecting these devices directly to a

Figure 4. Front panel view of LED indicators

Status LEDs

LED	Status	Color	Description
Power	On	Green	The switch is supplied with
			suitable power.
	On	Green	The port is connecting with
			the device.
LINK/ACT	Blinks		The port is receiving or
			transmitting data.
	Off		The port is not linked
			successfully with the device.
	On	Orange	The port is operating in Full
			Duplex mode.
FDX/COL	Blinks		A packet collision occurred at
			this port.
	Off		No device attached or the port is
			operating in Half Duplex mode.

Switch. The switch automatically learns node addresses, which are subsequently used to filter and forward all traffic based on the destination address.

Small Workgroup

The Dyna-Switch/16 and 24 can be used as standalone switches interconnecting personal computers, servers, and print servers forming a small workgroup.

Dyna-Switch/16

Printers

Server

Workstations

Figure 5. Small Workgroup Application

4 5