Package Contents

Necessary Cables:	UTP (Unshielded Twisted Pair) Cable
LED Indicators:	Per Device:	Power
	Per Port:	LINK/ACT, FDX/COL

Performance Specifications

Transmission Method:	Store and forward
MAC address table:	8K-entry MAC address table
Maximum Forwarding Rate:	14,880 pps /10Base-T
(64byte packets)	148,800 pps /100Base-TX
Maximum Filtering Rate:	14,880 pps /10Base-T
(64byte packets)	148,800 pps/100Base-TX
Flow control:	Back-pressure (half-duplex)
	Pause frame (full-duplex)
Duplex mode:	Supports both Half-duplex and
	Full-duplex mode

Physical & Environmental Specification

Power Supply:	100-240V AC, 50-60Hz
	Internal universal power supply
Dimensions:	440mm x 161mm x 44mm (LxWxH)
	17.6” x 6.44” x 1.76” (LxWxH)
Operating temperature:	0˚C to 45˚C (32˚F to 113˚F)
Storage temperature:	-40˚C to 70˚C ( -40˚F to 158˚F)
Humidity:	10% to 90% (non-conditioning)
EMI:	FCC Class A, CE mark
Safety:	UL, cUL

FCC Statement

This equipment has been tested and found to comply with the limits for a class B device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user will be required to correct the interference at the user’s expense.

Package includes the following:

■Dyna-Switch/16 or 24

■Rack-mounting brackets

■AC power cord

■Four (4) adhesive-backed rubber feet

■User’s manual

■Warranty card

Dyna-Switch/16 or 24

AC power cord

rubber feet

User’s Guide

Rack-mounting Brackets

Figure 1. Contents of package.

IMPORTANT: If any piece is missing or damaged, please contact your local dealer or reseller for service.

For Your Records

Product Name:

Serial Number:

Date of Purchase:

Purchased from:

Notes: