Resolute Acclaim Woodburning Stove

Introduction

Thank you for choosing a Vermont Castings Resolute Acclaim.

Your stove is one of the finest available. It features high efficiency, non-catalytic performance, using space-age refractory material and the precisely calibrated delivery of air to a concentrated charcoal bed to promote secondary combustion in a controlled environment.

If treated properly and operated according to the guidelines in this manual it will provide years of safe, dependable, and economical heating.

The Resolute Acclaim has been tested and is listed by Warnock Hersey International of Middleton, Wisconsin. The test standards are ANSI/UL-1482 and 737 for the United States and ULC S627 and CAN/CSA B366.2 for Canada.

The Resolute Acclaim is listed for burning wood. Do not burn other fuels.

The Resolute Acclaim is listed and approved for installation in mobile homes only in the United States and only with use of Vermont Castings Mobile Home Installation Kit #3249.

The Vermont Castings Resolute Acclaim is in compliance with the standards set forth by the Federal Environmental Protection Agency, 40 CFR Part 60.532(b)(2), as stated on the permanent label attached to each stove.

In addition to directions on installation and operation, this manual includes directions on maintenance and assembly.

We recommend that you hire a professional solid fuel stove installer to install your stove, or to advise you on the installation should you attempt to install it yourself.

Save These Instructions.

Table of Contents

 

Specifications

3

Installation

4

Operation

17

Maintenance

24

Replacement Parts

29

Proposition 65 Warning: Fuels used in gas, wood- burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Accessories

Warming Shelf

 

#0064 Classic Black

#1356 Midnight Blue

#1351 Sand

#1357 Suede Brown

#1353 Green

#1385 Biscuit

#1354 Ebony

#1387 Chestnut Brown

#1355 Bordeaux

#1390 Vt. Classic Green

#0184 Rear Heat Shield

 

#0246 Bottom Heat Shield

 

#0133 Sparkscreen

 

#3255 Outside Air Adapter (for 3” ducting)

#3249 Mobile Home Kit - includes: Rear and Bottom Heat Shields, Outside Air Adapter, Ducting and Leg Clips

#0574 Stove Surface Thermometer

#3421 Gasket Kit

 

#4360 Griddle Handle Kit

 

Short Legs

 

#0565 Classic Black

#2910 Green

#0295 Biscuit

#2912 Sand

#0296 Chestnut Brown

#2915 Bordeaux

#0297 Ebony

#2916 Midnight Blue

#0298 Vt. Classic Green

#2917 Suede Brown

2

2000893

Page 1 Page 3
Page 2
Image 2
Vermont Casting 2490 installation instructions Introduction, Table of Contents, Accessories
Page 1 Page 3

2490 specifications

The Vermont Casting 2490 is a distinguished wood-burning stove that epitomizes quality craftsmanship and innovative technology. This stove is a popular choice among homeowners seeking efficient heating solutions while adding a touch of elegance to their interiors.

One of the main features of the Vermont Casting 2490 is its impressive heating capacity. Designed to efficiently heat spaces up to 2,000 square feet, it is suitable for both large and small living areas. The stove is constructed from durable cast iron, which not only provides a classic aesthetic but also retains heat effectively. This material ensures that heat is radiated evenly and steadily into the room long after the fire has died down, maximizing the stove’s efficiency.

The Vermont Casting 2490 incorporates advanced combustion technology that ensures optimal burning efficiency. With an EPA-certified design, this stove significantly reduces particulate emissions, making it a more environmentally friendly choice compared to traditional wood stoves. The innovative airflow system promotes clean combustion, resulting in fewer creosote build-ups, which enhances safety and reduces maintenance.

Another standout characteristic of this model is its ease of use. The Vermont Casting 2490 features a convenient ash management system, allowing users to easily remove ash and maintain the unit without hassle. Additionally, the large glass door provides an unobstructed view of the fire, which adds a cozy ambiance to any room. The door is designed with airwash technology that helps keep the glass clean, ensuring that the view of the flames remains unobscured.

For customization and design flexibility, the Vermont Casting 2490 is available in various finishes and styles, allowing it to seamlessly fit into diverse home decors. Owners can choose from a range of colors and trims to suit their personal taste and complement their living space.

In conclusion, the Vermont Casting 2490 combines traditional craftsmanship with modern technology to deliver a reliable and efficient heating solution. Its large heating capacity, advanced combustion efficiency, user-friendly features, and aesthetic flexibility make it a top choice for wood-burning stoves. Homeowners can enjoy both warmth and style, making this stove a worthy investment for any home.
Top Page Image Contents