Figure 4-7. The process of creating VLAN group
Continue to configure the other ports with another VLAN group. In the following example, we create three VLAN groups (VLAN 1: Port 4, 5, 6; VLAN 2: Port 1, 2, 3, 4; VLAN 3: Port 4, 7, 8, 9) and the 4th port may be connected to an MIS member.
Restore Factory Setup
If you make a mistake while setting up any of the menus, you can easily restore the switch setting to the factory default by selecting the main menu, choosing the 3rd item, “Restore Default Setup”, by typing “3”. The switch will reset to the original factory settings.
Reset Device
If the switch performs improperly or if you want to reboot the switch, go back to Main Menu and select the 4th item by typing “ 4 “ to reboot the Switch.
16