Attaching Rubber Feet
A_ Make sure mounting surface on the bottom of the Switch is grease and dust free.
B_ Remove adhesive backing from the Rubber Feet.
C_ Apply the Rubber Feet to each corner on the bottom of the Switch. These footpads protect the Switch from shock and vibration.
Figure 2-6. Attaching Rubber Feet to each corner on the bottom of the Switch
Power On
Connect the power cord to the power socket on the rear panel of the Switch. The other end of the power cord connects to the power outlet. The internal power supply in the Switch works with AC in the 100- 240VAC, frequency 50~60Hz voltage range.
Check the power indicator on the front panel to ensure that power is properly supplied.
7