Coleman 5726-750 Features, Handle, Lid Latch, Air outlet vent, Filter, DC power socket

Features

Handle Lid

Lid Latch

Air outlet vent	Air intake area
	Filter
DC power socket

Opening/Closing the lid

Lid open	Opening the lid	Closing the lid
	Pull up	Press down

Warning

Lid Opening/Closing mechanism

The lid is equipped with a mechanism that prevents the lid from closing quickly. If the lid is half open, the mechanism will not operate properly, and the lid may shut forcefully un- der its own weight. Therefore, open the lid completely to ac- tivate the mechanism.

Operating Panel

COOL-3

Cools the Power Cooler to approximately 37˚F (3˚C)

	COOL-2	FREEZE-1
		Cools the Power Cooler to
	Cools the Power Cooler to
		approximately 19˚F (-7˚C)
	approximately 43˚F (6˚C)
COOL-1		FREEZE-2
Cools the Power Cooler to		Cools the Power Cooler to
approximately 50˚F (10˚C)		approximately -0.4˚F (-18˚C)

Low-battery light

The low-battery light flashes when the input voltage is low. Use the light to check the battery condition.

Warning light

The warning light illuminates when the temperature of the unit’s cooling system rises.

If the warning light illuminates, remove any objects blocking the air intake area or air outlet vent. Make sure that the filter is clean. If it is dirty, perform mainte- nance (see page 8). Make sure the unit is located in an environment below 120˚F. When the environment returns to normal, the warning light will shut off.

Power Cable and Power Supply

DC plug

Power plug

DC	Household
Power Cable	Power Supply
(5726-3661)	(5232F640T)

	Power button
	Press and hold the power button	Temperature setting indicators flash.
	to turn the power on or off.		When the temperature in the cooler reaches
			the set temperature, the flashing lights change
Power indicator
			to continuous illumination.

●Do not operate the product in extremely hot or cold environment (see page 10 for recommended operating temperature range). If the cooler internal air temperature

drops below -40˚F(-40˚C) or rises above 140˚F(60˚C), the "on/off" light, "Freeze-1" light, and "Freeze-2" light will all flash, warning users to immediately turn off the product and correct the extreme temperature condition. The cooler can be turned back on once the ambient temperature condition is within the recommended range and the cooler internal air temperature rises above -40˚F(-40˚C) or drops below 140˚F (60˚C).

●To avoid malfunction, the switches will only operate after being pressed for approximately one second. Continue to press until a high-pitched tone is emitted.

3 4