10
CAUTION: RECHARGEABLE APPLIANCES
Certain rechargeable devices are designed to be recharged by plugging them directly into an AC receptacle. These devices may damage the Power Force 150™. When first using a rechargeable device, monitor its temperature for the initial ten minutes of use to determine whether it emits excessive heat. If excessive heat is detected, it is a good indication that the device should not be used with this inverter. This problem does not occur with the majority of
Table IV shows the estimated
TABLE IV. Using the INDUSTRIAL 900™ AS A
|
| APPLIANCE TYPE | ESTIMATED POWER | ESTIMATED USAGE | |
|
| CONSUMPTION (IN WATTS) | TIME (IN WATTS) |
|
|
|
|
|
|
|
|
|
| CELLULAR PHONE/CAMCORDER/ | 50 WATTS | ||
|
| POWER TOOL CHARGERS |
|
|
|
|
| LAPTOP COMPUTER, PRINTER, | 90 WATTS | 3.0 HOURS | |
|
| LAMP, FAN, VCR, WORKLIGHT, |
|
|
|
|
| RADIO/CASSETTE/CD PLAYER, |
|
|
|
|
| SUMP PUMP | 100 WATTS | 1.5 HOURS | |
|
| FAX, TV, SMALL POWER TOOL | 140 WATTS | 1 HOUR | |
|
|
|
|
| |
NOTE: ALL TIMES ARE APPROXIMATE, AND BASED UPON FULLY CHARGED UNIT. |
|
| |||
6. SPECIFICATIONS |
|
|
| ||
| Model | VEC021 | VEC021AC | ||
| Voltage | 12 VDC | 12 VDC/110 VAC | ||
| Boost Power | 400 Instantaneous | 400 Instantaneous | ||
|
|
| Cranking Amps | Cranking Amps | |
| Peak Ampere Power | 900 Amps | 900 Amps | ||
Battery Type | Sealed, lead- acid, rechargeable, | |
| ||
Bulb | ||
Booster Cables | #4AWG welding | |
Booster Clamps | 600 AMP copper clamps | |
HEIGHT | (29.85CM) | |
DEPTH | (15.88CM) | |
WIDTH | ||
WEIGHT | 18LBS. (8.16KG) | |
VEC023/150 Watt Power Inverter | Optional | Included |
7. REPLACEMENT PARTS
For replacement parts (bulbs, batteries, fuses, etc.), contact Vector™ Customer Service: (954)
11
8.OPTIONAL VEC023 POWER FORCE 150™ WATT INVERTER FOR USE WITH THE INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUPPLY:
VEC023 Power Force 150™
NOTE: The following information applies only to the inverter as it is used in conjunction with the INDUSTRIAL 900™.
If the inverter is purchased together with the VEC021AC or separately, a full manual (detailing the independent use of the inverter) is supplied.
Features:
•The Power Force 150™ inverter provides a portable power source to run a variety of
•The Power Force 150™ inverter is easily attached to (or removed from) the rear of the INDUSTRIAL 900™.
The exclusive mounting (Patent Pending) is neat and convenient, maintaining the original
•Using the Power Force 150™ inverter with the INDUSTRIAL 900™ does not reduce the efficiency of either device,
or their portability.This combined unit provides the convenience of a
•The Power Force 150™ inverter can be stored permanently in place on the INDUSTRIAL 900™, or stored sepa- rately
and quickly connected as needed.
•The Power Force 150™ inverter can also be used independently of the INDUSTRIAL 900™ as a
supply (use in conjunction with your vehicle). For instructions, refer to the inverter ‘s full manual (supplied, when the inverter is purchased separately) or call Vector™ Customer Service Department at (954)
The Vector Power Force 150™ inverter is one in a series of the most advanced DC to AC inverters available today. With proper care and appropriate usage, it will provide years of dependable service in your car, truck, RV, boat or even airplane.
For easy reference, see the following sections titled:
8.1Introduction
8.2How the Power Force 150™ Inverter Works
8.3Installation
8.4Operating Tips
8.5Troubleshooting
8.1INTRODUCTION:
The Power Force 150™ supplies 150 watts of continuous power, with a 300 watt peak, in the form of a household- type outlet that is ready to deliver
the inverter directly into the INDUSTRIAL 900™