Intercontinental | If the telephone line's quality is low, it is | |
connections are | best to reduce the transmission speed in | |
sometimes | order to insure that the connection | |
interrupted. | remains stable. | |
|
| |
During file transfer, | The telephone line is bad, select a lower | |
the modem sends | transmission speed. | |
back many | ||
transmission errors | ||
settings. | ||
or a very low | ||
| ||
transfer rate. | Change the transfer protocol. | |
|
| |
During transmission | Check the modem's and the software's | |
of a fax, errors alter | flow control. | |
its legibility or cut | Remove all 'Terminate and stay resident' | |
off the connection. | ||
programs (TSRs) that could be active | ||
| ||
| during the connection. | |
| If the problem occurs during the trans- | |
| mission of a fax from Windows or OS/2 | |
| check that the communications driver that | |
| you are using is the one corresponding to | |
| the environment that you use (Windows, | |
| OS/2), or the one supplied specifically with | |
| the communications software. | |
|
| |
You get a message | With a Windows 3.1 or 3.11 system: | |
telling you that the | Click on the Configurator icon in the | |
modem is conflicting | ||
Sportster Winmodem 33600 & x2/56K | ||
with another device. | ||
program group to get access to changing | ||
| ||
| the setting(s). Try different I/O addresses | |
| and IRQ lines. If that does not work, you | |
| may need to free up an I/O address or | |
| IRQ line. | |
| With a Windows 95 system: | |
| 1. Click on the Start button. | |
| 2. Scroll to Help. | |
| 3. Click on the Contents tab. | |
| 4. Select Troubleshooting. | |
| 5. Select If you have a hardware conflict. | |
| 6. Follow the screen commands. | |
|
|
Sportster Winmodem 33600 & x2/56K - User's manual 25