USRobotics Wireless 54Mbps ADSL Router manual Support, Model Number Serial Number

English

Note: Ad-hoc mode is used for peer-to-peer network configurations. infrastructure mode is used for integrated wireless and wired LAN configuration.

My computer does not recognise the wireless function of the Wireless 54Mbps ADSL Router after I changed the settings.

Possible Solution:

Ensure that you are connecting to the correct Wireless 54Mbps ADSL Router by verifying the correct MAC address. Ensure that the correct passphrase and encryption option are being used. If you changed the settings in the configuration of the Wireless 54Mbps ADSL Router, you must also change the settings of every wireless adapter attached to this network. The settings of the wireless adapters must match the new settings of the Wireless 54Mbps ADSL Router.

I cannot achieve 54Mbps connections to the Wireless 54Mbps ADSL Router.

Possible Solution:

Make sure the wireless products you are using to connect to the Wireless 54Mbps ADSL Router support 54 Mbps speeds. 54 Mbps wireless products must be used in order to connect to the Wireless 54Mbps ADSL Router at a rate of 54 Mbps. Launch the router’s Web User Interface and manually set the connection speed to 54 Mbps.

Possible Solution:

Low connection speed or range can also be caused by environmental interference. Try to move the product around to improve the link quality. In addition, keep in mind that other factors such as lead based paint, concrete walls, and electronic items such as 2.4G phones may affect your wireless range.

Support

To obtain additional support for your router:

1.Know your model and serial number.

Your model number is 9110. You can find your serial number on the side of the package and on the bottom of the router.

Model Number Serial Number

9110

2.Go to the Support section of the U.S.Robotics Web site at www.usr.com/support/.

8