Seagate KSD-541-P manual Trademarks

Page 3

The information contained in this document is subject to change without prior notice. Copyright (C). All Rights Reserved.

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference in which case the user will be required to correct the interference at his own expense.

NOTICE:

(1)The changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.

(2)Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

CISPR A COMPLIANCE:

This device complies with EMC directive of the European Community and meets or exceeds the following technical standard.

EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment. This device complies with CISPR Class A.

CE NOTICE

Marking by the symbol indicates compliance of this equipment to the EMC directive of the Euro-

pean Community. Such marking is indicative that this equipment meets or exceeds the following techni- cal standards:

EN 55022: Limits and Methods of Measurement of Radio Interference characteristics of Information Technology Equipment.

EN 50082/1:Generic Immunity Standard -Part 1: Domestic Commercial and Light Industry.

EN 60555-2: Disturbances in supply systems caused by household appliances and similar electrical

equipment - Part 2: Harmonics.

Image 3
Contents Installation Guide Page Trademarks Table of Contents Plug and Play Power over EthernetIndustrial Features IntroductionFunction FeaturesLED Indicators Product PanelsSpecifications Environmental Power over Ethernet Function PoE ModelDC in Power Input MechanicalUnpacking InstallationSafety Cautions Mounting the Switch on a WallDin-Rail Mounting Panel Mounting Applying PowerUsing DC Power Jack Using Terminal BlocksMaking Connections Making UTP ConnectionsMaking Fiber Connection Making PoE Connections Function State Interpretation LED IndicationApplications Applications with Basic Switch ModelApplications with PoE Switch Model