Seagate KSD-541-P manual Specifications

1.4 Specifications

Copper Ports w/h PSE (P2-P5)

Compliance	IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Connectors	Shielded RJ-45 jacks
Pin assignments	Auto MDI/MDI-X detection
Configuration	Auto-negotiation
Transmission rate	10Mbps, 100Mbps
Duplex support	Full/Half duplex
Network cable	Cat.5 UTP
Power over Ethernet	IEEE 802.3af-compliant PSE (function equipped in PoE Model only)
Combo Port (P1)
Compliance	IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/100Base-FX
Interface Selection	Fiber is selected if an SFP fiber transceiver is installed in SFP slot
Copper Interface
Connector	Shielded RJ-45 jack
Pin assignments	Auto MDI/MDI-X detection
Configuration	Auto-negotiation or software control
Transmission rate	10Mbps, 100Mbps
Duplex support	Full/Half duplex
Network cable	Cat.5 UTP
Fiber Interface
Connector	SFP slot for optional SFP type fiber transceivers
Configuration	100Mbps, Full duplex
Far End Fault Support	Enabled
Network cables	MMF 50/125 60/125, SMF 9/125
Eye safety	IEC 825 compliant
Switch Functions
MAC Addresses Table	1K entries
Forwarding & filtering	Non-blocking, full wire speed
Switching technology	Store and forward
Maximum packet length	1536 bytes
Flow control	IEEE 802.3x pause frame base for full duplex operation
	Back pressure for half duplex operation
Broadcast Storm	Protection design

-7-