Seagate KSD-541-P manual Features, Product Panels, LED Indicators, Function

Page 6

1.1 Features

￿Provides 5 10/100Mbps RJ-45 and one 100Mbps SFP slot

￿All copper ports support auto-negotiation and auto-MDI/MDI-X detection

￿Provides full wire speed forwarding

￿Supports IEEE 802.3x flow control for full-duplex and backpressure for half-duplex

￿Provides SFP slot for optional optical fiber connection

￿Provides four IEEE 802.3af-compliant PoE PSE ports

￿Provides two types of power supply interfaces - DC Jack and terminal block

￿Supports stand-alone, wall, Din-Rail, and panel mounting

￿Industrial-rated emission and immunity performance

1.2 Product Panels

The following figure illustrates the faces of the switch:

1.3 LED Indicators

LED

Function

POWER

Power status

LINK/ACT

Port link status and activities (Port 1 - Port 5)

100M/10M

Port speed status (Port 1 - Port 5)

PoE STATUS

Port PoE power status (Port 2 - Port 5)

SFP/RJ-45

Port 1 SFP / RJ-45 selection status

-6-

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Guide Page Trademarks Table of Contents Introduction Power over EthernetIndustrial Features Plug and PlayProduct Panels FeaturesLED Indicators FunctionSpecifications Mechanical Power over Ethernet Function PoE ModelDC in Power Input EnvironmentalMounting the Switch on a Wall InstallationSafety Cautions UnpackingDin-Rail Mounting Applying Power Panel MountingUsing Terminal Blocks Using DC Power JackMaking Connections Making UTP ConnectionsMaking Fiber Connection Making PoE Connections LED Indication Function State InterpretationApplications with Basic Switch Model ApplicationsApplications with PoE Switch Model
Top Page Image Contents