QSC Audio DSP-4 manual Remote mounting 4-ch., 8-ch., Powerlight & non QSC amp’s

Remote mounting (4-ch., 8-ch., Powerlight & non QSC amp’s)

The DSP-4 module requires “remote” mounting when used with the 4- and 8-channel CX, 4-channel DCA, Powerlight, and non-QSC amplifiers.

If you have an amplifier that requires “remote” mounting, you need to:

1- Obtain the Accessory Remote Mounting Bracket.

2- Attach the right angle bracket to the module (see illustration, below).

3- Mount the module/bracket assembly on the main bracket.

4- Secure the adjustable rack ears (included in bracket kit) to the main bracket. 5- Mount the completed assembly in your equipment rack.

6- Connect inputs, outputs, DataPorts, and external power as required.

Be sure to secure the DSP-4 using all mounting screws. This will ensure reliable mechanical and electrical performance.

Powerlight 6.0 and Powerlight 9.0 amplifiers require that pin #9 be removed from the remote mounting interconnect cable. Amplifier damage may result from use of cable that has pin #9 connections present.

9