Introduction - Functions and Features
The full set of features is available on QSC DataPort equipped amplifiers connected to the DSP module via the DataPort connector
“V2” DataPort amplifiers and
Parametric EQ Adjustable frequency Adjustable gain Adjustable Q factor
Ability to bypass all EQ with a single mouse click Ability to add or delete EQ
Graphical response curve provided in software Assignable anywhere in the signal chain
Signal Compressor
Adjustable attack and release times Adjustable Gain
Adjustable threshold Adjustable compression ratio
Graphical response curve provided in software Assignable anywhere in the signal chain
Signal Level Meter (peak or RMS response)
Signal Attenuation (mute or bypass)
Output Gain up to +12 dB
2 to 1 Mixer Signal Splitter
External Contact Closure Sensing
Pink & White Noise Generator
Variable Frequency Tone Generator
Clip & Protect Indication
Signal Polarity Reversal
High- and
Selectable responses:
Butterworth (6,12,18 or 24 dB/octave slope) Bessel (6,12,18 or 24 dB/octave slope)
Graphical response curve provided in software Adjustable frequency & slope
Ability to bypass all EQ with a single mouse click Ability to add or delete EQ
Assignable anywhere in signal chain
High- and
Graphical response curve provided in software Ability to bypass all EQ with a single mouse click Ability to add or delete EQ
Assignable anywhere in signal chain
Output Power Limiter (QSC DataPort Amps) Select QSC amplifier model for tailored results Graphical response curve provided in software Ability to quickly bypass limiter with a single mouse click
Directly monitors amplifier output voltages and cur- rents
Multiple Delays
910 millisecond maximum (sum of all delay objects)
20.83 microsecond increments
Entry can be in seconds, feet or meters Assignable anywhere in signal chain.
5