Perle Systems GNS-30CR Features, Product data, Output performance Class42W for GSM850/EGSM900

Page 8

5. Features

5.1Product data

•Support band:

GNS-30CR: EGSM900/DCS1800/PCS1900 Certified in accordance with GSM phase 2/2+

•Output performance:

-Class4(2W) for GSM850/EGSM900

-Class1(1W) for DCS 1800/PCS 1900

•Control via AT commands

•Input voltage range DC+6….. +30V

•Dimensions: 122 × 68 × 21.6mm

•Weight: approx.165g

•SIM card: 3V or 1.8V

•Data interface: 9pinRS232

•GPRS multi-slot class 10

•EDGEmulti-slot class 12

•GPRS mobile station class B

Image 8

Contents GNS-30CR NOVACOM wirelessUser Guide 1. Safety information Note The warranty does not apply in the event of improper use2. Contents 3.1 Front View 3. Overview3.2 Rear View 4.Product description Wide input voltage range Highly compact, light and powerful Extended AT commands for industrial applicationsSupport band GNS-30CR EGSM900/DCS1800/PCS1900 Data, voice, SMS and faxSecurity systems Traffic system Fleet management Teleservice Telematics Telemetry Remote monitoring Remote control4.2 Applications Remote meter reading Mobile office Vending/POS5. Features Class11W for DCS 1800/PCS Control via AT commandsInput voltage range DC+6….. +30V Dimensions 122 × 68 × 21.6mm Weight approx.165g SIM card 3V or Data interface 9pinRS2325.2 SMS 5.3 DataPoint-to-point MT and MO SMS cell broadcast Text and PDU mode CSD up to 14.4kbps USSD Non-transparent modeConnector for plug-in power supply unit Antenna connector SMA female RS232 interface5.4 Fax 5.5 External interfaces6. Installation 6.1 Package contents6.2 Safety and installation information 7. Interface description7.1 Plug-in power supply units power interface internal + / external -supply adaptor7.2 SIM card holder 7.3 Antenna connector SMA female A quad band antenna GSM850/EGSM900/DCS1800/PCS1900 can befemale coaxial jack Pin assignments7.4 RS232 interface converter which baud rate can support at least 230400bps Use and operatione.g. host computer is connected via the RS232 cable 8. Startup State in GSM network Operating states/LEDThe LED display the following states of the Modem 9. AT command control