Basic Operations Adjusting the balance

Basic Operations

Adjusting the balance

1.Press A-M button # and select “BALANCE”.

2.Turning the Rotary knob %clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press A-M button #several times until the function mode is reached.

Adjusting the fader

1.Press A-M button # and select “FADER”.

2.Turning the Rotary knob %clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press A-M button #several times until the function mode is reached.

1.Press and hold LOUD button # for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, “LD” lights in the display.

2.Press and hold LOUD button # for 1 second or longer to turn off the loudness effect. “LD” goes off in the display.

Note:

•When using a sold separately digital sound pro- cessor (DPH7500z), a feature called auto loud- ness is selected. This function is different from the loudness effect. For further details on the auto loudness feature, refer to the subsection “Output adjustment of auto loudness, subwoofer and playback band”.

Adjusting the Z-enhancer

1.Press Z-EHCR button 8 and select the Z- enhancer mode (1 to 3) to adjust.

2.Press A-M button # and select “Z-EHCR”.

3.Turning the Rotary knob % clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

∗When Z-enhancer 1 is selected, you can adjust the bass in the range of ±2.

∗When Z-enhancer 2 is selected, you can adjust the treble in the range of ±2.

∗When Z-enhancer 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When the adjustment is complete, press A-M button #several times until the function mode is reached.

Note:

•If you set the Z-ENHANCER function to ON (1 to 3), you cannot set the tone bypass.

Turning on/off the loudness

The loudness effect emphasizes the bass and treble to create a natural sound tone. When you are listening to music at a low volume, it is rec- ommended to use the loudness effect.

12 ARX8570z