4. Quick Start Example
After installing OMEGALOG® an example setfile will be installed within the OMEGALOG® installation directory. The example file will log the internal temperature of the logger. In order to familiarise yourself with the logger the novice user may find this example Setup useful.
4.1Startup OMEGALOG® and Select Logger Type
Click on the shortcut icon on your desktop to launch OMEGALOG® or select it from your start menu. When the OMEGALOG® Assistant is loaded, ensure the correct logger
Type and communication method is selected.
Logger type can be viewed from the OMEGALOG® Assistant, if you need to make any changes select Logger Selection from the toolbar or run the Communication Wizard. (Note: the default communication method is USB and you will need to change this via the Communication Wizard if you are using any of the other communication methods).
4.2Synchronise Logger & PC
It is advisable to start by synchronising the Logger clock with the PC clock. See step 1 and 2 below:
Synchronise clocks:
From
OMEGALOG® Assistant click on Logger Setup.
From the Logger Setup screen select the Logger Control tab.
Click on Set
Logger Time to PC Time, click OK on the confirmation screen.
28923 | Version 1.2 - October 08 |
| Page 9 |