Omron CJ-Series manual CX-Process Tool and Monitor, Software Specifications

CX-Process Tool and Monitor

Software Specifications

CX-Process Tool and Monitor

Software Specifications

	Item	Specifications
		CX-Process Tool	CX-Process Monitor Plus
Name		CX-Process	CX-Process Monitor Plus
Model number		WS02-LCTC1-EV5	WS02-LCMC1-EV2
Applicable PLCs		CS-series PLCs
		CJ-series PLCs
Applicable Units		CJ-series Loop-control CPU Units	CJ-series Loop-control CPU Units
		CS-series Loop Control Units/Boards	CS-series Loop Control Units/Boards
		CS1D Process-control CPU Units	CS1D Process-control CPU Units
Compatible com-	Computer	IBM PC/AT or compatible
puters
	CPU	Intel CPU (Core, Pentium, or Celeron family)
		For Windows Vista: 1 GHz min.
		For any other OS: 333 MHz min. required, 1 GHz min. recommended
	OS	Microsoft Windows 2000 (Service Pack 3 or higher), NT4.0	Microsoft Windows 2000, NT4.0, or XP
		(Service Pack 6a), 98SE, Me (See note 1), XP, or Vista (Ul-
		timate or Business)
	Memory	For Windows Vista, 1 GB min.	Minimum:	96 Mbytes
		For any other OS: 256 MB min. required, 512 MB min. rec-	Recommended: 128 Mbytes min.
		ommended
	Hard disk storage	Min. required: 350 Mbytes of free space,	Minimum:	650 Mbytes free space
		Recommended: 450 Mbytes or more of free space (includ-	(Including approximately 50 Mbytes used for
		ing approx. 280 Mbytes used by communications middle-	communications middleware and other purpos-
		ware)	es)
	Monitor	Minimum: XGA	Minimum requirement: XGA
		Recommended: SXGA 65,536 colors or more	(XGA or above recommended)
	CD-ROM drive	1 drive min.
	Sound board	---	1
	Mouse	Recommended: Microsoft mouse or compatible pointing device
Communications	Connection with CPU Unit	When FinsGateway Serial Unit driver is used:
method	(or Serial Communica-	Communications protocol with PLC: Host Link or Peripheral Bus (See note 2.)
	tions Board/Unit)	• Connect the computer to the peripheral port or built-in RS-232C port of the CPU Unit, or to the
		RS-232C port of the Serial Communications Board/Unit.
		• Connecting cable:
		For connecting to peripheral port of CPU Unit: CS1W-CN@@@(2 m or 6 m)
		For connecting to RS-232C port of CPU Unit: XW2Z-@@@-@(2 m or 5 m)
		When CX-Server is used:	CX-Server is not supported.
		Communications protocol with PLC: Host Link or Peripher-
		al Bus
		Connecting Cable:
		• For connecting to peripheral port of CPU Unit:
		CS1W-CN@@@(2 m or 6 m)
		For connecting to RS-232C port of CPU Unit:
		XW2Z-@@@-@(2 m or 5 m)
	Connection via Controller	When FinsGateway Controller Link driver or CX-Server is used:
	Link	Install the software in a computer with a Controller Link Support Board to communicate with a PLC with a
		Controller Link Unit mounted.
	Connection via Ethernet	When FinsGateway ETN_UNIT driver or CX-Server is used:
		Install the software in a computer with an Ethernet Board to communicate with a PLC with an Ethernet Unit
		mounted.

14