Ratoc Systems manual Setup, Connect the SMA03U to the PC

Page 13

3.Setup

Here is how to get started SMA03U:

1.Connect the SMA03U to the PC.

2.Installation of the driver for Windows98.

3-1. Connect the SMA03U to the PC

1.Turn on the PC.

2.Connect the USB cabel of SMA03U to the USB port at back of the PC,

as shown below.

13

Image 13

Contents SMA03U Program update and support FeaturesTrademarks System requirements SmartMedia compatibilityFormat SmartMedia Troubleshooting FCC Statement Introduction About the SMA03U User Guide Name of the parts of SMA03 Restrictions System requirementsBefore using SMA03U Ratoc Systems,Inc How to registerPage For Windows98 Connect the SMA03U to the PC SetupWhen you insert USB cable to the PC for the first time Installation of the driver for Windows98 DeviceRecommended. Then click Next button Page When the following window appears,click on the Next button Page When the following window appears,click on the Next button Your deviceRecommended.Then click Next button Click on the Next button Page Page Page Page Access LED Using SMA03URemoval of SMA03U Inserting the SmartMedia Push the SmartMedia until it is firmly seated Removing the SmartMedia Pull the SmartMedia out of the slot as shown below Handling files in SmartMedia Format SmartMedia About Write-Protect of SmartMediaRemovable Disk TroubleshootingDevice Manager My ComputerSet USB Port Enable Click on the Device Manager tab Page Page Page Page Set SMA03U Enable Click on the Device Manager tab Page Page Adapter Page For Macintosh Setup for Macintosh Installation of the driver for Macintosh Page You will see a screen below. Click Restart Connect the SMA03U to the Mac Using SMA03U Removal of SMA03U Turn the gold surface Front as shown above Page Removing the SmartMedia Pull the SmartMedia out of the slot as shown below Handling SmartMedia Page Problem Cause Solution Install the driver again SMA03U Specifications