Ratoc Systems SMA03U manual System requirements, Restrictions

Page 8

1-5. System requirements

-USB port

-Windows 98, MacOS8.5.1 or later

1-6. SmartMedia compatibility

Supports both 3.3V and 5V SmartMedia (up to 128Mb)

-5V :2MB, 4MB

-3.3V :2MB, 4MB,8MB,16MB,32MB,64MB,128MB

NOTE:As for 64MB and 128MB,SMA03U is made on the specifications of 64MB and 128MB ,although 64MB and 128MB is not on the market as of May/1999.

1-7. Restrictions

-If you format SmartMedia from OS,there are some possibility that you can’t

use the. SmartMedia anymore with digital cameras.

So,we recommend you format SmartMedia with your digital camera.

-It is necessary for USB port to be suppleid more than 76mA current.

USB Hubs below don’t have enough current under some conditions.

i)Bus Power Type Hub	(This kind of Hub doesn’t use AC adapter )
ii)Hub which is cascaded	(There are more than 2 Hubs with cascade
connection)

We recommend you use SelfPowered Hub (This kind of Hub uses AC adapter)

8

Image 8

Contents SMA03U Features Program update and supportTrademarks System requirements SmartMedia compatibilityFormat SmartMedia Troubleshooting FCC Statement Introduction About the SMA03U User Guide Name of the parts of SMA03 System requirements RestrictionsBefore using SMA03U How to register Ratoc Systems,IncPage For Windows98 Setup Connect the SMA03U to the PCWhen you insert USB cable to the PC for the first time Installation of the driver for Windows98 DeviceRecommended. Then click Next button Page When the following window appears,click on the Next button Page When the following window appears,click on the Next button Your deviceRecommended.Then click Next button Click on the Next button Page Page Page Page Using SMA03U Access LEDRemoval of SMA03U Inserting the SmartMedia Push the SmartMedia until it is firmly seated Removing the SmartMedia Pull the SmartMedia out of the slot as shown below Handling files in SmartMedia About Write-Protect of SmartMedia Format SmartMediaTroubleshooting Removable DiskMy Computer Device ManagerSet USB Port Enable Click on the Device Manager tab Page Page Page Page Set SMA03U Enable Click on the Device Manager tab Page Page Adapter Page For Macintosh Setup for Macintosh Installation of the driver for Macintosh Page You will see a screen below. Click Restart Connect the SMA03U to the Mac Using SMA03U Removal of SMA03U Turn the gold surface Front as shown above Page Removing the SmartMedia Pull the SmartMedia out of the slot as shown below Handling SmartMedia Page Problem Cause Solution Install the driver again Specifications SMA03U