NETGEAR CG814WG V3 manual Advanced Settings, WAN Setup

Page 45
Advanced Settings

Wireless Cable Modem Gateway CG814WG v3 Reference Manual

Advanced Settings

These features are for advanced users.

Figure 4-7

For Firewall Rules, see Chapter 3, “Content Filtering and Firewall Rules”.

WAN Setup

You can use this screen to set the gateway to respond to a Ping, specify a DMZ Address, and view or change the MTU Size setting.

Figure 4-8

Respond to Ping on WAN: If you want the gateway to respond to a Ping from the Internet, select this check box and then click Apply. This can be used as a diagnostic tool.

DMZ Address: Specifying a DMZ Address allows you to set up a PC that is available to anyone on the Internet for services that you have not defined. There are security issues with doing this, so only do this if you are willing to risk open access. If you do not assign a DMZ address, the gateway discards any undefined service request.

To assign a DMZ Address, type the value in the DMZ Address field and then click Apply.

To remove a DMZ Address, type 0 in the DMZ Address field, and then click Apply.

Managing Your Network

4-7

v1.0, June 2007

Image 45
Contents NETGEAR, Inc Wireless Cable Modem Gateway CG814WG Reference ManualTrademarks Safety InformationStatement of Conditions FCC Warning StatementProduct and Publication Details Technical SupportBestätigung des Herstellers/Importeurs Certificate of the Manufacturer/Importerv1.0, June Connecting the Gateway to the Internet ContentsWireless Configuration Content Filtering and Firewall RulesTroubleshooting Wireless Cable Modem Gateway CG814WG v3 Reference ManualTechnical Specifications and Factory Default Settings Managing Your NetworkConventions, Formats and Scope About This ManualHow to Print this Manual How to Use This ManualPrinting a Page in the HTML View Printing a ChapterPrinting the Full Manual Wireless Cable Modem Gateway CG814WG v3 Reference Manual Chapter 1 Connecting the Gateway to the Internet Package ContentsFront Panel Table 1-1. LED Descriptions Connecting the Gateway to the InternetWhat You Need Before You Begin Rear PanelHardware Requirements LAN Configuration Requirements Connecting the CG814WG v3 GatewayInternet Configuration Requirements InstallationPage The power light is lit after turning on the gateway 3. Log in to the Gateway When you connect to the gateway the Gateway status screen opens Chapter Wireless Configuration Wireless Placement and Range Guidelines Authentication SSID and Wireless Security Settings FormViewing or Changing Wireless Settings Table 2-1. Wireless Settings Turning on Access Control to Restrict Access by MAC Address To restrict access based on MAC addresses How to Configure WEP Wired Equivalent Privacy Settings for WEP encryption are shown on the screen How to Configure WPA 2-11 Radius Port Port number of the Radius Server. The default is2-12 Content Filtering Chapter Content Filtering and Firewall RulesLogs Blocking Keywords, Sites, and ServicesBlocking Keywords and Domains Services Table 3-1. Services Firewall RulesPort Forwarding Considerations for Port Forwarding Port BlockingWireless Cable Modem Gateway CG814WG v3 Reference Manual Chapter Managing Your Network MaintenanceGateway Status Table 4-1. Gateway Status FieldsManaging Your Network Signal Status Set Password Restoring Saved Settings Backup SettingsEvent Log Resetting to Factory Default SettingsWAN Setup Advanced SettingsDynamic DNS LAN IP Settings Diagnostics Ping TestPerform a DNS Lookup Remote Management Access Reboot the RouterDisplay the Routing Table Revert to Factory Default Setting UPnPURL to Connect to This Device For more information, see the online help 4-14 Basic Functions Chapter TroubleshootingUsing LEDs to Troubleshoot Connecting to the Gateway’s Main MenuTroubleshooting the ISP Connection Testing the LAN Path to Your Gateway Troubleshooting a TCP/IP Network Using a Ping UtilityTesting the Path from Your PC to a Remote Device Wireless Cable Modem Gateway CG814WG v3 Reference Manual Appendix A Technical Specifications and Factory Default Settings Technical SpecificationsTechnical Specifications and Factory Default Settings Factory Default Settings Table A-1. Default Configuration SettingsWPA-PSKTKIP, and WPA2-PSKAES Table A-1. Default Configuration Settings Inbound communications coming in from Appendix B Related Documents Related Documents