NETGEAR CG814WG V3 manual Logs, Blocking Keywords, Sites, and Services

Page 32
Logs

Wireless Cable Modem Gateway CG814WG v3 Reference Manual

Logs

A log is a detailed record of the Denial of Service (DoS) attacks directed at your network. You can use e-mail notification to receive these logs in an e-mail message. If you do not have e-mail notification set up you can connect to the gateway to view the logs.

Figure 3-2

To receive logs by e-mail:

1.For the Contact Email Address, type an e-mail address to which the logs will be sent. Use a full e-mail address (for example, ChrisXY@myISP.com).

2.For the SMTP Server Name, type the outgoing SMTP mail server of your ISP (for example, mail.myISP.com). If you leave this box blank, no alerts or logs will be sent.

3.Select the E-mail Alerts Enable check box.

4.Click Apply.

For information about event logs, see “Event Log” in Chapter 4.

Blocking Keywords, Sites, and Services

The gateway provides a variety of options for blocking Internet based content and communications services. With its content filtering feature, the CG814WG v3 Gateway prevents objectionable content from reaching your PCs. The CG814WG v3 allows you to control access to Internet content by screening for keywords within Web addresses. It also has the capability to block access to all sites except those that are explicitly allowed. Key content filtering options include:

Blocking access from your LAN to Internet locations that contain keywords that your specify.

Blocking access to websites that you specify as off-limits.

Allowing access to only websites that you specify as allowed.

3-2

Content Filtering and Firewall Rules

v1.0, June 2007

Image 32
Contents Wireless Cable Modem Gateway CG814WG Reference Manual NETGEAR, IncSafety Information TrademarksStatement of Conditions FCC Warning StatementTechnical Support Product and Publication DetailsBestätigung des Herstellers/Importeurs Certificate of the Manufacturer/Importerv1.0, June Contents Connecting the Gateway to the InternetWireless Configuration Content Filtering and Firewall RulesWireless Cable Modem Gateway CG814WG v3 Reference Manual TroubleshootingTechnical Specifications and Factory Default Settings Managing Your NetworkAbout This Manual Conventions, Formats and ScopeHow to Use This Manual How to Print this ManualPrinting a Page in the HTML View Printing a ChapterPrinting the Full Manual v1.0, June Front Panel Chapter 1 Connecting the Gateway to the InternetPackage Contents Connecting the Gateway to the Internet Table 1-1. LED DescriptionsHardware Requirements What You Need Before You BeginRear Panel Connecting the CG814WG v3 Gateway LAN Configuration RequirementsInternet Configuration Requirements InstallationPage The power light is lit after turning on the gateway 3. Log in to the Gateway When you connect to the gateway the Gateway status screen opens Chapter Wireless Configuration Wireless Placement and Range Guidelines SSID and Wireless Security Settings Form AuthenticationViewing or Changing Wireless Settings Table 2-1. Wireless Settings Turning on Access Control to Restrict Access by MAC Address To restrict access based on MAC addresses How to Configure WEP Wired Equivalent Privacy Settings for WEP encryption are shown on the screen How to Configure WPA Radius Port Port number of the Radius Server. The default is 2-112-12 Chapter Content Filtering and Firewall Rules Content FilteringBlocking Keywords, Sites, and Services LogsBlocking Keywords and Domains Services Firewall Rules Table 3-1. ServicesPort Forwarding Port Blocking Considerations for Port Forwardingv1.0, June Maintenance Chapter Managing Your NetworkManaging Your Network Gateway StatusTable 4-1. Gateway Status Fields Signal Status Set Password Backup Settings Restoring Saved SettingsResetting to Factory Default Settings Event LogAdvanced Settings WAN SetupDynamic DNS LAN IP Settings Perform a DNS Lookup DiagnosticsPing Test Display the Routing Table Remote Management AccessReboot the Router URL to Connect to This Device Revert to Factory Default SettingUPnP For more information, see the online help 4-14 Chapter Troubleshooting Basic FunctionsConnecting to the Gateway’s Main Menu Using LEDs to TroubleshootTroubleshooting the ISP Connection Troubleshooting a TCP/IP Network Using a Ping Utility Testing the LAN Path to Your GatewayTesting the Path from Your PC to a Remote Device v1.0, June Technical Specifications and Factory Default Settings Appendix A Technical Specifications and Factory Default SettingsTechnical Specifications WPA-PSKTKIP, and WPA2-PSKAES Factory Default SettingsTable A-1. Default Configuration Settings Wireless Cable Modem Gateway CG814WG v3 Reference Manual Inbound communications coming in from Appendix B Related Documents Related Documents