NETGEAR MA101 manual Troubleshooting Tips, Symptom Cause Solution

Page 33

Troubleshooting Tips

If you have problems getting wirelessly connected to your network, try the tips below.

Symptom

Cause

Solution

The LED on the

The wireless USB

• Remove and reinsert the wireless USB

wireless USB

adapter cable is not

adapter USB cable.

adapter is off

inserted into the

• Check the device manager in Windows

 

USB port properly

to see if the wireless USB adapter is

 

or the proper

properly recognized in the Windows

 

MA101 USB

operating system. Reload the driver if

 

Adapter software is

necessary.

 

not loaded.

• Try to install the MA101 on a different

 

 

 

 

USB port on your system if one is

 

 

available.

 

 

 

I am connected

This could be a

• Check to make sure that the access point

to a wireless

physical layer

is connected to the Ethernet network.

network

problem or a

• Make sure that the IP addresses and the

through an

network

Windows networking parameters are all

access point,

configuration

configured correctly. Please refer to

but I cannot see

problem.

“Preparing Your PCs for Network

the other

 

Access” on page 41.

computers on

 

 

the Ethernet

 

 

side of the

 

 

network.

 

 

 

 

 

27

Image 33
Contents NETGEAR, Inc Technical Support Contents Index Bold times roman User input Preface About This Installation GuidePage About the MA101 802.11b Wireless USB Adapter Key Features and Related Netgear ProductsChapter Introduction Model MA101 Resource CD, including What’s in the Box?Road Map for How to Get There From Here Road Map for ‘How to Get There From Here’A Road Map for How to Get There From Here Up the MA101 Other computers Connect to Password that have been Help Network Page What You Will Need Before You Begin Chapter Installing MA101 802.11b Wireless USB AdapterObserve Location and Range Guidelines Verify System RequirementsTwo Basic Operating Modes MA101 Default Wireless Configuration Settings MA101 802.11b Wireless USB Adapter in Infrastructure Mode Setting Up the MA101 in Infrastructure Mode For Windows XP Users Installing a MA101Connect the MA101 USB Adapter to your computer Install the MA101 driver software Verify wireless connectivity to your network For Windows 98/Me Users Installing a MA101 Install the MA101 softwareInsert the Model MA101 Resource CD into your computer Click Yes when asked if you want to reboot the system Ssid Wireless Configure your wireless adapterInsert the Model MA101 Resource CD into your CD-ROM drive For Windows 2000 Users Installing a MA101Page MA101 Configuration Utility MA101 802.11b Wireless USB Adapter in Ad-Hoc Mode Using the MA101 to Connect in Ad-Hoc ModeSet up the MA101 USB Adapter for your computer Setting Up a MA101 in Ad-Hoc ModeConfigure your wireless adapters Computer-to-computer Ad-Hoc networks onlyVerify wireless connectivity between the computers Color Condition Description Interpreting System Tray Icon ColorsSymptom Cause Solution Troubleshooting TipsPage Enabling Basic Wireless Security Features Protecting Your Wireless ConnectionPage Changing the Ssid Setting the Wireless Network Name SsidConfiguring WEP Encryption Configuring WEP Encryption SecurityDsss Appendix a Technical SpecificationsPage Related Publications Wireless Networking Appendix B 802.11b Wireless Networking BasicsAd Hoc Mode Peer-to-Peer Workgroup Wireless Network ConfigurationAuthentication and WEP Encryption Extended Service Set Identification EssidWired Equivalent Privacy WEP Wireless Channel SelectionRadio frequency channels used are listed in Table Page Preparing Your Computers for TCP/IP Networking Appendix C Preparing Your PCs for Network AccessInstall or Verify Windows Networking Components Configuring Windows 98 and Me for TCP/IP NetworkingPage Page Choose Settings, and then Control Panel Locate your Network Neighborhood iconPrimary Network Logon is set to Windows logon Page Verifying TCP/IP Properties Configuring Windows 2000 or XP for TCP/IP NetworkingDhcp Configuration of TCP/IP in Windows XP Dhcp Configuration of TCP/IP in Windows XP orConnection with the wireless icon and choose Status TCP/IP details are presented on the Support tab Dhcp Configuration of TCP/IP in Windows Page Verifying TCP/IP Properties for Windows XP or Page Numerics IndexPage Page Page Certificate of the Manufacturer/Importer Page NETGEAR, Inc