If you need to add the Client for Microsoft Networks:
a.Click the Add button.
b.Select Client, and then click Add.
c.Select Microsoft.
d.Select Client for Microsoft Networks, and then click OK.
If you need to add File and Print Sharing for Microsoft Networks:
a.Click the Add button.
b.Select Client, and then click Add.
c.Select Microsoft.
d.Select File and Print Sharing for Microsoft Networks, and then click OK.
3.Restart your PC for the changes to take effect.
Enabling DHCP to Automatically Configure TCP/IP Settings in Windows 98 and Me
After the TCP/IP protocol components are installed, each PC must be assigned specific information about itself and resources that are available on its network. The simplest way to configure this information is to allow the PC to obtain the information from a DHCP server in the network.
You will find there are many similarities in the procedures for different Windows systems when using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of Windows.
44