Troubleshooting Tips
Power LED is off. | Make sure that power is supplied to the electrical |
| outlet, and that the Powerline devices are not plugged |
| into an extension cord, power strip, or surge protector. |
Power LED is blinking | Power saving mode occurs when the Ethernet LED is |
amber. | off. This can occur in the following circumstances: |
| • The Ethernet cable is unplugged. |
| • The device connected through the Ethernet cable |
| is turned off. |
| • The adapter is idle for 10 minutes. |
| It returns to normal mode within two seconds |
| after the Ethernet link is up. |
Pick A Plug LED is off. | • If you have set network security, make sure |
| that all Power line devices are using the same |
| encryption key; see the online user manual for |
| details. |
| • Press the Factory Reset button on each device for |
| one second to return the Powerline adapter to its |
| factory default settings. |
Pick A Plug LED is amber or red.
Move the Powerline device closer to the other Powerline devices.
10