NETGEAR xavb5201 v2 manual Technical Support

Page 12

Technical Support

Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support resources. You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.

Compliance

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit: http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

 

Netgear, Inc.

 

350 East Plumeria Drive

201-18267-02

San Jose, CA 95134, USA

July 2014

Image 12
Contents Installation Package Contents Getting Started Meet Your Adapter Off. There is no electrical power Solid. The adapter is connected to a Powerline networkPowerline devices using the same encryption key Factory ResetEthernet port NetworkInstall Your Adapters Secure Your Network ¾¾ To create a secure network¾¾ To add adapters to a Powerline network with security set Add AdaptersPower LED is blinking Factory default settingsAmber Ethernet cable is unpluggedIts factory default settings Ethernet LED is offSecurely plugged into the devices Technical Support